MEAN WELL
“One Stop Shopping for all powers You Need” Switching power supply สินค้าคุณภาพที่ได้รับการยอมรับทั่วโลก ด้วยมาตรฐาน ISO 9001 ออกแบบและพัฒนาให้มีประสิทธิภาพสูงสุด แข็งแรง ทนทาน รูปแบบกะทัดรัด ง่ายต่อการติดตั้ง
Product Series
AC/DC> Enclosed- Enclosed Switching Power Supply
G3 Series
Wattage : 15W~150W
Features :
Miniature size, non-PFC
5G vibration, 70℃ operation
300VAC input surge
Suitable for critical applications
2 outputs are isolated for RID series
LRS Series
Wattage : 35W~350W
Features :
Non-PFC, most economical models
Ultra compact and 1U low profile
300VAC input surge
No load power consumption: 0.2W~0.75W
5G vibration, 70℃ operation
Operating altitude up to 5000 meters
Complete safety certificates: IEC/EN60335-1(PD3), IEC/EN61558-1, -2-16; IEC/EN/UL60950-1 and GB4943
SE Series
Wattage : 100W~1500W
Features :
Non-PFC
Economical medium to high power models
PFC Series
Wattage : 150W~1000W
Features :
• Built-in active PFC function
• Full range input, complete functions
UHP Series
Wattage : 200W~2500W
Features :
Slim and Low profile
Fanless design,free air convection
Built-in active PFC function150%
peak load capability(100ms)
DC OK active signal and redundant function(option)
Operating altitude up to 5000 meter
LED indicator for power on
Model ：UHP-200(R) / UHP-350(R) / UHP-500(R) / UHP-750 / UHP-1000 / UHP-1500 / UHP-2500
RSP-75~500 Series
Wattage : 75W~500W
Features :
1U Low profile with active PFC function: 75W~320W: 30 mm, 500W: 40.5 mm
Built-in constant current limiting circuit (RSP-75/100/150)
Built-in remote ON/OFF control (RSP-75/100/150/500)
Built-in remote sense (RSP-500 only)
G5 Series
Wattage : 75W~1000W
Features :
Built-in active PFC function
High efficiency, no load power consumption <0.5W~0.75W
5 years warranty
MSP Series
Wattage : 100W~1000W
Features :
Medical level, built-in active PFC
Medical safety approved (MOOP level)
High efficiency, no load power consumption<0.5W~0.8W
5 years warranty
HEP Series
Wattage : 100W~1000W
Features :
90~305VAC with PFC
Fanless design
High efficiency up to 96%
Wide working temperature range -55~+70℃
Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration
Operating altitude up to 5000 meters
Suitable for high/low temperature, high dust, high moisture, high vibration, high salt outdoor or harsh environment
6 years warranty
Peripheral
Wattage : NA
Features :
20A/40A Power Supply Redundancy Module
Supports system 1+1 and 1+N redundancy
Two DC input contacts and single output
Built-in two channels DC OK relay contacts for monitoring power status
AC/DC> DIN Rail- DIN Rail Power Supply
HDR Series
Wattage : 15W~150W
Features :
Plastic case, step shape|
1∅, full range input
Compact size, 1SU~6SU width (DIN EN43880)
Isolation class II
DC output voltage adjustable
No load power consumption <0.3W
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for building automation and control of household appliance
ICL Series AC Inrush Current Limiter
Wattage : NA
Features :
180~264VAC input
Built-in thermal fuse and bypass relay
Operation temperature -30~+70℃
2 installation options available:
DIN rail type ICL-16R/28R, can be installed on TS-35/7.5 or 15 DIN rails
Linear type ICL-16L/28L, can be installed on flat surface
MDR Series
Wattage :10W~96W
Features :
Plastic case, ultra slim
1∅, full range input
No load power consumption<0.75W~1W
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in active PFC function
DC OK signal output (MDR-10/20)
DC OK relay contact (MDR-40/60/100)
Class I, Div 2 Hazardous Locations T4 (MDR-40/60)
DRA Series
Wattage : 40W~60W
Features :
Plastic case
1∅, full range input
Io can be adjusted 10~100% by 1~10VDC, PWM signal or resistance
Assemble on industrial rail TS-35 / 7.5 or 15
Suitable for machine vision inspection system and plant cultivation applications
DRH/DRT Series
Wattage :120W~960W
Features :
Metal case
2∅ or 3∅, 340~550 VAC input
Fanless design
EDR Series
Wattage :75W~150W
Features :
Metal case, low cost
1∅, full range input
Slim size, model width: 32 ~ 40mm
EMC EN55022 class A
Assemble on industrial rail TS-35 / 7.5 or 15
2 years warranty
NDR Series
Wattage :75W~480W
Features :
Metal case, economical models
1∅, full range input
Slim size, model width: 32 ~ 85.5mm
EMC EN55022 class B
Assemble on industrial rail TS-35 / 7.5 or 15
3 years warranty
SDR Series
Wattage :75W~960W
Features :
Metal case, slim size
1∅, full range input (230VAC only for SDR-960)
94% high efficiency and complete functions
Built-in active PFC function (except SDR-75)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact (except SDR-75)
130%~150% peak load capability by models
Current sharing function (SDR-480P/960)
TDR Series
Wattage :240W~960W
Features :
Metal case, slim size
3∅, 340~550VAC input
High efficiency up to 94.5%
Built-in active PFC function
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact
WDR Series
Wattage :60W~480W
Features :
Metal case, slim size
1∅ and 2∅ , 180~550VAC wide input
High efficiency up to 93%
Built-in active PFC function (240W & 480W)
Assemble on industrial rail TS-35 / 7.5 or 15
Built-in DC OK relay contact
Peripheral
Wattage :NA
Features :
20A redundant module
40A DC UPS module
20A/40A DIN Rail Buffer Module
AC/DC> Open Frame- Open Frame Switching Power Supply
Industrial – On Board Type
Wattage :1W~90W
Features :
Assemble on the main PCB of the system
Miniature encapsulated type
No load power consumption<0.075W~0.1W
Working temperature:-30~+85℃ by models
Comply with EN55022 class B without any additional components
Various styles: PIN, SMD, Screw terminal style
Industrial – Green PCB Type
Wattage :15W~500W
Features :
3″ x 2″, 4″ x 2″, 5″ x 3″ complete sizes for choice
PFC models: EPP, ELP series;
Non-PFC models: EPS series
No load power consumption <0.1W~0.5W
Suitable for ErP regulated end systems
Industrial – PCB Type
Wattage :5W~250W
Features :
PCB type, non-PFC for small wattage models
Multiple form factors for different installations: 7″ x 4.25”, 5” x 3”, 4” x 2”, slim type
Medical – On Board Type
Wattage :5W~90W
Features :
Assemble on the main PCB of the system
Medical safety approved (2xMOPP)
Suitable for BF application with appropriate system consideration
Medical – PCB Type
Wattage :30W~500W
Features :
Compact size
PCB type, non-PFC for small wattage models
Medical safety approved (2xMOPP)
Low leakage current
Suitable for BF application with appropriate system consideration for selected models
AC/DC> Specific Purpose- Specific Purpose Power Supply
Security-DIN Type
- Wattage : 40W~100W
- Features :
– With UPS function (need external batteries)
– Suitable for security industry or battery backup systems
– Assemble on industrial rail TS-35 / 7.5 or 15
Security-Enclosed Type
Wattage :35W~155W
Features :
With UPS function (need external batteries) for AD/ADD series
Suitable for security industry or battery backup systems
Security-PCB Type
Wattage :35W~160W
Features :
With UPS function (need external batteries)
Suitable for security industry or battery backup systems
Built-in active PFC function (PSC-160)
Case available
Moving Sign Series
Wattage :150W~400W
Features :
PFC: HSP, HDP series, UHP series
Non-PFC: HSN, NEL, ERP series
Light weight and low profile
HSP series—2.5V, 2.8V, 3.6V, 3.8V, 4.2V, 5V
HSN series—4.2V, 5V
NEL series—2.8V, 4.2V, 5V
HDP series—V1: 2.8V, V2:3.8V
ERP series—24V, 36V, 48V
UHP series—4.2V,4.5V,5V
Suitable for high efficiency moving sign applications
Conformal coating (HSP, HDP, NEL, HSN series)
Semi-potted and design against rain splash (ERP-350)
AC/DC> PV Power- Programmable Power Supply
CSP Series
Wattage :3000W
Features :
Full range 180~264VAC input
Built-in active PFC function
High efficiency up to 93%
Built-in DC fans for forced air cooling
Output voltage/current programmable
Active current sharing up to 9000W(2+1)
Built-in remote ON/OFF control / Auxiliary power / power OK signal
Protections: short circuit/over current/over voltage/over temperature/ fan failure
5 years warranty
Model：CSP-3000
PHP Series Water-cooled
Wattage :3500W
Features :
Water-cooled heat dissipation technology
Output voltage and constant current level programmable
Support PMBus communication protocol (CANBus optional)
Support PSUs in parallel connection
Active current sharing, total system power up to 14000W (3+1)
Optional cold plate for quick implementation,ordering no.: HS-656
Model：PHP-3500
DPU Series
Wattage :3200W
Features :
Universal AC Input/ Full Range
Built-in Active PFC
High efficiency up to 94.5%
air cooling by built-in DC fan
Output voltage and constant current level programmable
Built-in OR-ing FET, support hot swap (hot) plug function
Protection: Short Circuit/ Overload / Over voltage/ Over temperature
Optional conformal coating
Safety approval: UL/TUV/EAC/CE/CB
5 years warranty
Model
DPU-3200：DPU-3200
SPV Series
Wattage :150W~300W
Features :
Built-in active PFC function
Output voltage programmable from 20~110%
RST Series
Wattage :5000W~10000W
Features :
Single output power supply with 5000W / 10000W high wattage
3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC
Built-in active PFC function
High efficiency up to 91%
20000W with built-in parallel (active current sharing) function
Output voltage and constant current level programmable
5 years warranty
RSP-750~3000 Series
Wattage :750W~3000W
Features :
Programmable high power with active PFC function
Output voltage programmable
Constant current level Icc programmable (RSP-750/1600 only)
1U low profile (41mm) : RSP-750/1000/1600/2000,
2U profile : RSP-1500/2400/3000
Built-in current sharing (except RSP-750)
5 years warranty
AC/DC> Rack Power- 19″ Rack Power Unit
RCP Series
Wattage :1000W~18000W
Features :
Complete rack mountable front end solution: rectifier and charger
1U low profile
19 inch rack shelf available
DRP Series
Wattage :3200
Features :
Complete rack mountable front end solution: rectifier and charger
1U low profile
19 inch rack shelf available
AC/DC> Configurable- Modular Power Supply
NMP Series
Wattage :650W/1200W
Features :
Configurable/customizable/flexible power supply
Built-in active PFC function
4 slot output for NMP650
6 slot output for NMP1K2
NMP Series Selection Tool
UMP Series
Wattage :400W
Features :
Fan-less, 1U design
Modular design, with DC-DC module cards (NID35/65/100 series models)
Can be used as a single rail PSU
wide operating temperature ranges from -30 ~ +70 ° C
Meet OVC III requirements
Meet 2x MOPP isolation requirements, ideal for BF rated medical equipment
Model：UMP-400
MP Series
Wattage :450W/650W/1000W
Features :
Configurable/customizable/flexible power supply
Built-in active PFC function
5 slot output for MP450/650,
7 slot output for MP1k0
75W/100W/150W/210W/300W/360W module available
AC/DC> LED Driver- LED Driver
AP Series
Wattage :8W~35W
Features :
90~264VAC input
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV series
Constant current mode for APC series
Suitable for indoor LED lighting and moving sign applications
AP-E Series
Wattage :8W~16W
Features :
180~264VAC input only
Rectangular plastic case with IP42 level
Class II design, without FG
Low cost, small and compact size
Constant voltage mode for APV-E series
Constant current mode for APC-E series
Suitable for indoor LED lighting and moving sign applications
ELG Series
Wattage :75W~300W
Features :
100~305VAC input range
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150 BE-Type)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
ELG-C Series
Wattage :75W~300W
Features :
100~305VAC input range
Constant current (C.C.) output
Constant power (C.P.) output
Built-in active PFC function
No load/standby power consumption <0.5W
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output (ELG-150-C BE-Type)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting and outdoor LED lighting
5 years warranty
FDL Series
Wattage :65W~100W
Features :
180~295VAC input range
Built-in active PFC function
Constant current design
Fully encapsulated with IP65 level (FDL-65)/IP67(FDLC-80)
No load power consumption <0.5W
3 years warranty
GSC Series
Wattage :18W~40W
Features :
90~277VAC input, built-in active PFC function
Constant current mode
Fully isolated plastic case with IP40 design
Class II design, without FG
IEC320-C8 inlet for B type,
2 pole EURO plug for E type
No load power consumption<0.15W
Suitable for indoor LED lighting
HBG(P) Series
Wattage :60W~240W
Features :
Circular shape design:
HBG-60 : plastic case; HBG-100/160/240 : metal case; HBG-60P/100P/160P/240P : PCB type
90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]
Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type
IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240
Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160(P)/240(P) B type
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)
Suitable for LED high/low bay lighting, stage lighting and spot lighting
5 years warranty
Model
Case：HBG-60 / HBG-100(DA) / HBG-160(DA) / HBG-200(DA) / HBG-240(DA) / HBGC-300
PCB：HBG-60-P / HBG-100P(DA) / HBG-160P(DA) / HBG-240P
HLG Series
Wattage :40W~600W
Features :
90~305VAC input, built-in active PFC function
96% high efficiency (HLG-600H)
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement
IP68/-55℃ startup/10G vibration options available (Please contact MEAN WELL for details)
7 years warranty
HLG-C Series
Wattage :70W~480W
Features :
90~305VAC input, built-in active PFC function
Constant current output with high output voltage >60VDC
Metal case, IP67/IP65 design for indoor or outdoor installations
Function options:
output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming; smart timer dimming
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)
Suitable for LED street lighting and outdoor LED lighting
7 years warranty
Model
C.C.：HLG-60H-C / HLG-80H-C / HLG-120H-C / HLG-185H-C / HLG-240H-C / HLG-320H-C / HLG-480H-C
HVG(C) Series
Wattage :65W~650W
Features :
Wide input range 180~528VAC
Metal case, IP67/IP65 design for indoor or outdoor installations
Built-in active PFC function
Function options:
output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); timer dimming; smart timer dimming
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65/100)
Suitable for LED street lighting and outdoor LED lighting applications
5 years warranty
LDB-L/LW Series
Wattage :300/350/500/600mA
Features :
Constant current DC/DC buck-boost LED driver
High efficiency up to 91%
Comply with EN55015 and FCC part 15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Suitable for buck-boost type lighting systems (additional mother board is required)
Pin, wire style for choice
Model
Buck-boost：LDB-L
LDH Series
Wattage :350/500/700/1050mA
Features :
Constant current output DC/DC step-up LED driver
High efficiency up to 95%
Comply with EN55015 without additional any components
PWM+analog dimming and remote ON/OFF control
Suitable for boost type lighting systems (Additional mother board is required)
Pin, wire style for choice
LP Series
Wattage :18W~150W
Features :
90~264VAC input (except for 18W and 150W)
Slim plastic case with IP67 level
Economical design
Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)
-30~70℃ wide operation range
Suitable for economical LED lighting and moving sign applications
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)
ODL Series
Wattage :45W~65W
Features :
Constant current output mode (ODLC Series)
Constant voltage output mode (ODLV Series)
Flicker free design( ODLC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for indoor LED lighting applications
LDD-L Series
Wattage :300/350/500/600/700mA
Features :
Constant current output DC/DC step-down converter
High efficiency up to 97%
Comply with EN55015 and FCC part15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated with IP67 level for pin and wire style
Suitable for driving illumination LED
3 years warranty
LDD-H Series
Wattage :300/350/500/600/700mA
Features :
Constant current output DC/DC step-down converter
High efficiency up to 97%
Comply with EN55015 and FCC part15 without additional input filter and capacitors
PWM dimming and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated with IP67 level for pin and wire style
Suitable for driving illumination LED
3 years warranty
DLP-04 Series
Wattage :4
Features :
90~295VAC full range input
Slim design
Plastic case with class II
No load/standby power consumption<0.5w( type L)
Withstand 300VAC surge input for 5 seconds
-20~+60℃ working temperature
Protections: short circuit / over voltage
Dimension: DLP-04R : 35*90*54.5 mm (W*H*D)
DLP-04L : 145*38*22 mm (L*W*H)
3 years warranty
LDC Series
Wattage :35W~80W
Features :
Constant power output
Flicker free design
3 in 1 dimming：0~10Vdc、PMW signal or resistance
Built-in active PFC function
No load power consumption <0.5W
working temperature： -25~+90℃
Protections: short circuit /
UL/ENEC/TUV/CCC/CB/CE certified
5 years warranty
XLG Series
Wattage :25W~240W
Features :
Wide input range 100~305V AC
Constant power mode with adjustable output current
Built-in active PFC function and Efficiency up to 90%
Dimming functions with 3 in 1
Protections: Short circuit/Over voltage/Over temperature
Surge protection with 6KV(L/N-FG)/4KV(L-N)
5 years warranty
XBG Series
Wattage :100W~240W
Features :
Wide range 100~305VAC mains input
Circular shape with Patent Design(Patent No.CN201220314551) and Seal housing IP67
Built-in active PFC function and constant power mode
AC input cable with waterproof connector for flexible using
Surge protection: 6 KV /4KV
Protections: short circuit, over voltage, over temperature
Life time >50,000 Hrs. and 5 years warranty
SLD Series
Wattage :50~80W
Features :
Wide input range 110~305V AC
Slim and linear housing design
Built-in active PFC function and efficiency up to 90%
Design with class 2/II and SELV
Protections: Short circuit/Over voltage/Over temperature
3 years warranty
LCM- BLE Series
Wattage :40W~60W
Features :
Output driver current adjustable by dip switch
Plastic housing and class II design without FG
Built-in active PFC function and Efficiency up to 90%
Dimming functions with Bluetooth Mesh and Push input
Protections: Short circuit/Over voltage/Over temperature
Surge protection with 2KV(L-N)
PLD Series
Wattage :16W~60W
Features :
16W: 90~135VAC or 180~295VAC
25W: 90~295VAC
40W/60W: 180~295VAC
Built-in active PFC function
Fully isolated plastic case with IP42 level
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting
PLM Series
Wattage :12W~40W
Features :
110~295VAC input (180~295VAC input for E type)
Built-in active PFC function
Fully isolated plastic case with IP30 level
Class II design, without FG
Push terminal I/O
Constant current mode
No load power consumption<0.5W
Suitable for indoor LED lighting
OWA Series
Wattage :60W~120W
Features :
IP67 design for power body
Class II design, without FG
2 pole USA plug (U type)/ EURO plug (E type)
90~264VAC input (180~264VAC input for OWA-120E)
No load power consumption <0.15W
Energy efficiency Level VI
E-Type: meet CoC Version 5 (OWA-60E/90E); comply with EU ErP
U-Type: comply with EISA 2007/DoE and NRCan
5 years warranty
PCD Series
Wattage :16W~60W
Features :
16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
Fully isolated plastic case with IP42 level
Built-in active PFC function
Class II design, without FG
Constant current mode
Suitable for indoor LED lighting
LPF Series
Wattage :16W~90W
Features :
90~305VAC input, built-in active PFC function (200~400VAC for LPFH-60/60D)
Fully isolated plastic case with IP67 level (16W optional)
Class II design, without FG
Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D & LPFH-60/60D)
Suitable for LED lighting and moving sign applications
5 years warranty
NPF Series
Wattage :40W~120W
Features :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Class II design, without FG
No load/standby power consumption<0.15W (<0.5W for D type)
Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off ) for D type
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]
Suitable for LED lighting and moving sign applications
5 years warranty
PWM Series
Wattage :40W~120W
Features :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP67 level
Constant voltage PWM style output
Class II design, without FG
No load power consumption<0.5W
Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)
Type “HL” LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (PWM-40/60/120 only)
Suitable for LED strip lighting
5 years warranty
PLC Series
Wattage :30W~96W
Features :
90~264VAC input, built-in active PFC function
Fully isolated plastic case with screw terminal style of I/O
Suitable for indoor LED lighting and moving sign applications
PLN Series
Wattage :20W~96W
Features :
90~295VAC input (90~277VAC for PLN-20), built-in active PFC function
Fully isolated plastic case with IP64 level
Suitable for indoor LED lighting and moving sign applications
HLN Series
Wattage :40W~80W
Features :
90~305VAC input, built-in active PFC function
Fully isolated plastic case with IP64 level
Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type
User adjustable output voltage and current level for A type
Suitable for indoor LED lighting and moving sign applications
LCM Series
Wattage :25W~60W
Features :
180~295VAC input for 40W/60W, 180~277VAC input for 25W
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications
LCM-U Series
Wattage :40W~60W
Features :
90~132VAC input only
Constant current mode
Built-in active PFC function
Multiple-stage output current level selectable by DIP switch
Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
Built-in DALI interface and push dimming function for DA type
Suitable for indoor LED lighting applications
IDL Series
Wattage :25W~65W
Features :
Constant current output mode (IDLC Series)
Constant voltage output mode (IDLV Series)
Flicker free design (IDLC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for indoor LED lighting applications
PLP Series
Wattage :30W~60W
Features :
90~264VAC input , built-in active PFC function
Suitable for built-in LED lighting systems
IDP Series
Wattage :25W~65W
Features :
Constant current output mode(IDPC Series)
Constant voltage output mode(IDPV Series)
Flicker free design(IDPC Series)
Built-in active PFC function
Built-in 2 in 1 dimming function (0~10VDC or PWM signal, dim-to-off )
Suitable for built-in LED lighting systems
HLP Series
Wattage :40W~80W
Features :
90~305VAC input, built-in active PFC function
Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance)
Suitable for built-in LED lighting systems
AC/DC> LED Accessory – LED Accessories
DAP-04
Wattage :NA
Features :
90~305VAC input
Convert DALI signal to PWM signal
4 DALI addressable output channels
Meet DALI standards(IEC62386-101,102,207)
Suitable to use along with MEAN WELL’s AC/DC LED PSU with 3 in 1 dimming function
Model
DAP-04：DAP-04
PIR-045
Wattage :NA
Features :
Built-in Passive Infrared sensor module
MCU controller, no relay contact
Adjustable off-time delay / dimming level / sensitivity
Model：PIR-045
SPD Series
Wattage :NA
Features :
10kA/20kA surge protection device
Line to Ground & Line to Line protected
Suitable for surge protection of LED drivers
IP66/67 design for indoor or outdoor installations
WPD-06
Wattage :NA
Features :
EnOcean wireless control technology
Easy installation and configuration
6 protected and independent dimming output channels
Up to 128 wireless batteryless switches
Suitable for constant voltage lighting application
Up to 30 meter wireless distances
Model：WPD-06
AC/DC> Adaptor- External Switching Power Supply
Industrial – Desktop (Level V)
Wattage :15W
Features :
Various DC plugs available
Energy efficiency level VI
No load power consumption <0.075W
Comply with EISA 2007, NRCan, MEPS and ErP
0~50℃ working temperature
A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
2 years warranty
Industrial – Desktop (Level VI)
Wattage :18W~280W
Features :
Various DC plugs available
Global safety certificates for GST series :
UL, TUV, PSE, RCM, KC, SIRIM, BIS, EAC, BSMI, CCC
Energy efficiency Level VI
No load power consumption <0.075W~0.5W
Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5
Fanless design with -30~+70℃ working temperature
A type: Class I (with FG), IEC320-C14;
B type: Class II (no FG), IEC320-C8
3 years warranty
Industrial – Wall-mounted (Level VI)
Wattage :5W~60W
Features :
Various DC plugs available
Energy efficiency Level VI
No load power consumption <0.075W~0.15W
Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
-30~+70℃ working temperature
2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series
Slim design for SGA series
3 years warranty
Model
Fixed (USA 2 Pin)：
GS05U-USB / GS06U / GS15U / GST18U / GST25U / GST36U
Fixed (EURO 2 Pin)：
GS05E-USB / GS06E / GS15E / GST18E / GST25E / GST36E
Slim (USA 2 Pin)：
SGA12U / SGA18U / SGA25U / SGA40U / SGA60U
Slim (EURO 2 Pin)：
SGA12E / SGA18E / SGA25E / SGA40E / SGA60E
Slim (CH 2 Pin)：
Interchangeable：
GE12I / GE18I / GE24I / GE30I / GE40I
Medical – Desktop (Level VI)
Wattage :18W~220W
Features :
Various DC plugs available
Medical safety approved (2xMOPP), BF application(B type only)
Energy efficiency Level VI (GSM06/18/25/36/40/60 5~9V: Level V)
No load power consumption <0.1W~0.15W
Comply with EISA/DoE, NRCan, ErP and meet CoC Version 5
A type: Class I (with FG), IEC320-C14;
B type: Class II (without FG), IEC320-C8
3 years warranty
Medical – Wall-mounted (Level V / Level VI)
Wattage :6W~36W
Features :
Various DC plugs available
Medical safety approved (2xMOPP), BF applications
Energy efficiency Level VI (GSM06/12 and GSM18/25/36 5~9V for Level V)
No load power consumption <0.075W~0.3W
Comply with EISA/DoE, NRCan, MEPS, ErP and meet CoC Version 5
2 pole USA plug(U type)/EURO plug(E type) for GSM series, interchangeable type for GEM series
3 years warranty
Moistureproof – Desktop
Wattage :60W~120W
Features :
Various DC plugs available
IP67 design for power body
Energy efficiency Level VI
No load power consumption <0.15W
E-Type: EU ErP and meet CoC Version 5 (OWA-60E/90E);
U-Type: EISA 2007/DoE and NRCan
Class II (no FG)
5 years warranty
AC/DC> KNX- KNX
KNX Power
Wattage :20W~40W
Features :
EIB/KNX power supply with integrated choke
1∅, 180~264VAC input
No load power consumption <0.5W
Assemble on industrial rail TS-35 / 7.5 or 15
KNX to DALI Gateway
Wattage :NA
Features :
KNX proof gateway
Easy configuration & installation
Connect up to 64 DALI drivers
Built-in DALI power supply
LCD 2×12 display
Lighting control via the button
Lighting control via the integrated web server
Up to 16 DALI lighting groups setting
Up to 16 DALI scenes setting
3 year warranty
Model
Gateway：KDA-64
KNX-USB Interface
Wattage :NA
Features :
KNX-USB interface
No additional external power supply required
KNX commissioning, addressing and parameter settings
KNX protocol and system visualization
Diagnostic operations
Long messages up to 220 byte APDU
3 years warranty
KNX IP Router
Wattage :NA
Features :
KNX IP router
4 IP/TP tunnelings
No additional external power supply required
Universal Plug and Play
Telegram filtering
Built-in web front-end page
3 years warranty
Model
IP Router：KSR-01IP
KAA-8R Switching Actuator
Wattage :NA
Features :
8 channel actuator in a compact size
Suitable for various and mixed applications
For AX， C-load， capacitive and inductive type of loads
Program via ETS5.0 software
Manual control via Push button
Programmable various time and scene function
3 years warranty
KAA-4R4V Dimming Actuator
Wattage :NA
Features :
Dimming and switching LED driver and conventional electronic ballast
LED indicator for each channel
Linear or logarithmic dimming curve programmable via ETS software
Manual control via Push button on the panel
Programmable various time and scene function
3 years warranty
Model : KAA-4R4V
KNX Line Coupler
Wattage :NA
Features :
KNX TP Line Coupler/Repeater
Telegram filtering function
Long messages support up to 240 byte APDU
Trace the subline traffic
Diagnostic functions
Manual function
3 years warranty
Model：KSC
LCM-KN KNX-LED Driver
Wattage :25W~60W
Features :
Constant Current mode output with multiple levels selectable by dip switch
KNX protocol
Support emergency lighting (EL)
Integrated constant light output
Integrated KNX push button interface
Synchronization up to 10 units
Functions: Manual dim, operation hours, power consumption feedback, log/linear curve selection…etc
PWM-KN Series
Wattage :60W~120W
Features :
Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant IEEE 1789-2015 no risk
Built-in active PFC function
Standby power consumption<0.5W
Integrated KNX control protocol
No need KNX-DALI gateway
Model：PWM-60-KN / PWM-120-KN
AC/DC> Charger- External Battery Charger
Stationary Charger
Wattage :450W~750W
Features :
Chargers for lead-acid and Li-ion batteries
3-stage charging curve: PB-300/360, 2/3/8-stage charging curve: PB-600/1000, 3-stage charging curve suitable for harsh environment applications: HEP-600C
Intelligent charger with programmable 3-stage charging curve: RPB-1600/RCB-1600
5 years warranty for RPB-1600/RCB-1600, 6 years warranty for HEP-600C
Green Desktop Charger
Wattage :120W~360W
Features :
ENP: Level VI power supply,
ENC: 3-stage programmable charger for lead-acid batteries
Universal AC input/ Full range
Adaptor Charger
Wattage :30W~330W
Features :
Portable battery charger
Green adaptor with charging function
AC/DC> Accessory – Mounting Accessories
MHS012
Wattage :
Features :
Suitable for case : 206, 207, 912, 915, 916, 935, 939, 940, 977, 980, 982, 986, 987, 995
Model：MHS012
DC/DC> Din Rail- Din Rail
DDR Series
Wattage : 15~240
Features :
4:1 wide input range(DDR-15~60)
2:1 input range(DDR-120~240)
Fanless design, cooling by free air convection
High efficiency up to 92.5%
Protections: short circuit / overload / over voltage / input reverse polarity / input under voltage
LED power indicator
Suitable for DIN rail types: TS-35/7.5 or TS-35/15
4KVdc I/O isolation (reinforced isolation)
Ultra slim dimensions
3 years warranty
DDRH Series
Wattage : 60W
Features :
150~1500Vdc 10:1 ultra-wide input range
Potted with silicone gel, provides dust and moisture protection and free air convection cooling capability
-30～+80℃ ultra-wide temperature range ( >+55℃ de-rating)
Built-in DC OK relay contact
Protections: short circuit / overload / over voltage / over temperature / DC input under voltage / DC input reverse polarity
Adjustable output voltage (100~120%)
Model ：DDRH-60
DC/DC> Module Type- Module Type
Medical-SIP Package
Wattage : 1~20W
Features :
SIP7, 2〞x 1〞package with international standard pinout
Operating temperature range -40~ +90°C
Medical safety approved (1xMOPP/2xMOOP) according to ANSI AAMI ES60601-1
Low patient leakage current <5 μA
Protection: Short circuit(3 second max.)
3 years warranty
SMD Package
Wattage : 1W~2W
Features :
SMD type
Single and dual output models
SIP Package
Wattage : 1W~9W
Features :
Regulated and unregulated models
±10% or 2:1 wide input range
On board module type, assemble on the main PCB of the system
DIP Package
Wattage : 0.5W~3W
Features :
Regulated and unregulated models
±10% input range
On board module type, assemble on the main PCB of the system
DIP – 1.25″ x 0.8″ Footprint
Wattage : 3W~20W
Features :
DIP24 package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC (standard), 3KVDC (option) isolation
Single and dual output models
DIP – 1″ x 1″ Footprint
Wattage : 15W~30W
Features :
IP package
2:1 wide input
1.5KVDC isolation
Single output models
Remote ON/OFF control, remote sense, trimming output ±10% by models
DIP – 2″ x 1″ Footprint
Wattage : 5W~50W
Features :
DIP package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC (standard), 3KVDC (option) isolation
Single and dual output models
Remote ON/OFF control, remote sense, trimming output ±10% by models
DIP – 2″ x 2″ Footprint
Wattage : 15W~60W
Features :
DIP package
2:1 (standard), 4:1 (option) wide input
1~1.5KVDC isolation
Single, dual and triple output models
Half-brick
Wattage : 75W~150W
Features :
Half-brick size (2.28” x 2.4” x 0.5”)
DIP package
2:1 wide input range, 1.5KVDC isolation
Built-in remote ON/OFF and remote sense
2.5V / 3.3V / 15V output available
Optional heat sink available
DC/DC> On Board Type – On Board Type
NID Series
Wattage : 30W~100W
Features :
Non-isolated
3:1 wide input range
High efficiency up to 97%
Built-in remote ON/OFF control
Economical open frame design
NSD Series
Wattage : 5W~15W
Features :
4:1 wide input range
1~1.5KVDC isolation by models
Built-in remote ON/OFF contro
Low cost, high reliability
DC/DC> PCB Type – PCB Type
PSD Series
Wattage : 5W~45W
Features :
2:1 wide input range
1.5~2KVAC isolation by models
DC/DC> Enclosed Type – Enclosed Type
RSD Series
Wattage : 30W~300W
Features :
Compliance with EN50155 and EN45545-2 railway standard
2:1 or 4:1 wide input range
Isolation: 4000VDC
1U low profile
Half encapsulated
SD Series
Wattage : 15W~1000W
Features :
2:1 wide input range (4:1 for SD-500/1000)
1.5~2KVAC isolation by models
1U low profile (41mm) for SD-1000
12V/0.25A auxiliary output for SD-500/1000
Built-in remote ON/OFF control and remote sense for SD-500/1000
DC/AC> Modified Sine Wave-
A301/302 Series
Wattage : 100W~2500W
Features :
Modified sine wave output, suitable for resistive load
Low cost
1 year warranty
Model ：A301,302-100 / A301,302-150 / A301,302-300 / A301,302-600 / A301,302-1K0 / A301,302-1K7 / A301,302-2K5
DC/AC> True Sine Wave –
TN Series
Wattage : 1500W~3000W
Features :
True sine wave with solar charger & by-pass function
High surge power up to 200%
Output voltage / frequency adjustable
Conformal coating
Computer-based monitoring software, recommended for Windows 7 and Windows 8 Operating System (English and Chinese version)
3 years warranty
TS Series
Wattage : 200W~3000W
Features :
True sine wave output, suitable for motor related applications
High surge power up to 200%
Output voltage / frequency adjustable
Conformal coating (except for TS-200/400)
3 years warranty
IRC Series
Wattage :
Features :
Remote controller for TS-700~3000 , TN-1500~3000
DC/AC> Solar Inverter – Solar Inverter
ISI Series
Wattage : 500W
Features :
ISI-500: Modified sine wave with MPPT solar charger
ISI-501: True sine wave with MPPT solar charger
High surge power up to 200%
2 years warranty (ISI-500), 3 years warranty (ISI-501)
Model ：ISI-501
