A&D
Weighing Indicator A&D (Japan) เป็นสินค้าคุณภาพมาตรฐาน “ญี่ปุ่น” ตอบรับทุกการใช้งาน รวมถึงแบบ Explosion Protected และยังรองรับการเชื่อมต่อ Profibus Protocol เป็นผู้แทนจำหน่ายอย่างเป็นทางการในประเทศไทย
High Performance Weighing/Batching
AD-4401A
| Features: | |
| – | Powerful vibration-cancelling filter (High Performance Digital Filter) |
| – | 100 times/sec. High speed sampling |
| – | Up to 1 million counts of A/D resolution |
| – | Monitor & control weighing and batching with external or internal resolution |
| – | Fuzzy and Automatic Free Fall Compensation for consistently accurate batching results |
| – | Enter control set points through front keys or remotely though external thumb wheels |
| – | Automatic weight and/or count accumulation |
| – | Sub display provides feedback on all set points & simplifies calibration |
| – | Supplementary flow function assures accurate performance on each batch |
| – | A host of communications capabilities |
| – | BCD, RS-422/485, RS-232C, analog output, Ethernet and standard 4-20mA Current Loop |
| – | Compact DIN size housing speeds installation & reduces space |
| – | Digital Span Calibration enhances technical support and difficult installations |
| – | Splash proof front panel and keys (IP-65) |
| – | High sensitivity 0.3(µV/d for more accurate measurements) |
| – | Automatic batching and customer programming capability |
| – | Bright, clear fluorescent displays |
| – | Hold and peak hold functions |
| – | User programmed timer settings and alarms |
| – | Improve operational safety & performance |
| – | Weigh-in and Loss-in-Weight batching |
| Option: | |
| – | AD4401A-01 Parallel BCD output (open collector) |
| – | AD4401A-03 RS-422 / 485 input / output |
| – | AD4401A-04 RS-232C input / output |
| – | AD4401-06 Setpoint unit |
| – | AD4401A-07 Analog output (4-20mA) |
| – | AD4401-10 Stainless steel side panel |
| – | AD4401A-23 Ethernet |
AD-4402
| Features: | |
| – | 100 times/sec. High speed sampling. |
| – | High display resolution to 16,000 counts. |
| – | Up to 1 million counts of A/D resolution. |
| – | Large and easy to see blue Vacuum Fluorescent Display (VFD). |
| – | Uses a ten – key pad and function button that are designed for ease of operation and understanding. |
| – | The main display has a 7 – digit VFD with 18mm tall characters. |
| – | The sub display has a total of 54 5mm – tall dot matrix characters and displays the values and error comments. |
| – | Pre-programmed with multiple sequences and functions for filling machines, simple mixing machines |
| and a weight-checker and other applications. | |
| – | Stores 100 data for raw materials and 100 data for mixing codes. |
| – | RS-485 Serial Output (Current Loop) standard feature allows you to link up to 32 units to the display. |
| – | The Monitor Function shows each operating interface and provides a confirmation on the display. |
| – | The compact body meets DIN requirements, while minimizing the depth of the indicator to135mm. |
| – | With the proper optional interface, the AD-4402 is compatible with CC-Link, Device Net, PROFIBUS. |
| – | Standard Modbus function available. |
| Option: | |
| – | OP-01 Parallel BCD Output |
| – | OP-02 Relay Output |
| – | OP-03 RS-422/RS-485 I/O |
| – | OP-04 RS-232C I/O |
| – | OP-05 Parallel I/O |
| – | OP-07 Analog Output |
| – | OP-10 Stainless Steel Mounting Panel to replace AD-4325A |
| – | OP-20 CC Link Interface |
| – | OP-21 Device Net Interface |
| – | OP-22 PROFIBUS Interface |
Explosion Protected
AD-4403FP
| Features: | |
| – | 1/10,000 display resolution |
| – | High Sampling Speed – 100 times per second |
| – | Clear Blue Fluorescent Display |
| – | 100 Set Point sets – Each set is assigned a code number |
| – | Automatic Free Fall Compensation |
| – | Standard Current Loop with built-in buzzer |
| – | Lithium Battery BackUp lets you backup the Zero Compensation, Tare Weight, Set Point and Accumulation Data |
| – | Compact size |
| – | Automatic Accumulation |
| – | Nozzle Down Control Function |
| – | Input/Output Selection – Select a maximum of 6 sequences from 15 types of input and 20 types of output |
| – | Auto Print |
| – | For use in Zone 1 and Zone 2 Hazard Areas where explosive gases exist in the air |
| Option: | |
| – | OP-03 RS-422 / 485 Serial Interface* |
| – | OP-04 RS-232C Serial Interface* |
| – | OP-07 analog output |
| – | OP-10 Conduit Fittings HPN21(R8) (Fitting cable diameter : up to 8mm beyond 6mm) |
| – | OP-11 Conduit Fittings HPN21(R10) (Fitting cable diameter : up to 10mm beyond 8mm) |
| – | OP-12 Conduit Fittings HPN21(R12) (Fitting cable diameter : up to 12mm beyond 10mm) |
| – | OP-13 Conduit Fittings HPN21(R14) (Fitting cable diameter : up to 14mm beyond 12mm) |
| – | OP-14 Conduit Fittings HPN21(R16) (Fitting cable diameter : up to 16mm beyond 14mm) |
Check Weighing Indicator
AD-4404
| Features: | ||
| – | 100 times/sec. High speed sampling. | |
| High display resolution to 16,000 counts. | |
| – | Up to 1 million counts of A/D resolution. | |
| – | Easy to get judgment by Hi/OK/Lo or HiHi/Hi/Lo/LoLo comparator lights with buzzer. | |
| – | Foreign material detection input is newly added. | |
| – | Bar graph shows where the weight of an object falls within the OK range. | |
| – | Built-in timer controls weighing process by signal from an external photoelectric switch or by programmable weight recognition function that is beneficial for transparent objects. | |
| – | Weight, accepted piece, accumulated piece count, name of the object weighted, and standard deviation can be displayed at the touch of button. | |
| – | Up to 100 sets of target (OK weight), Hi, Lo and tare can be stored by individual code number. | |
| – | 5 digits of target and 4 digits of upper and lower limit can be set by the front key operation and number of digit and its location can be customized. | |
| – | Bright and large 13mm (0.52 inch) florescent display. | |
| – | 1/16000 display resolution capability precise enough for any application. | |
| – | Sealed keys keep out dust in industrial environments. | |
| – | 100 times/second fast sampling. | |
| – | Standard current loop output and standard RS-485. | |
| – | Full digital calibration makes zero and span calibration a breeze. | |
| – | Complete RFI/EMI protection. | |
| – | Many features simplify operation. | |
| – | Display (default) – Stores and recalls up to 100 sets of pre-sets items by individual code number. | |
| – Total number of pieces checked | ||
| – Total number of pieces accepted | ||
| – Target weight | ||
| – Bar graph indicates deviation from Target weight | ||
| – | Heavy-duty construction | |
| – | Easy installation | |
| – | Simple calibration | |
| – | 11 inputs and 11 open collector output standard (Optional dry contact relay) | |
| – | Auto zero maintenance with adjustable parameters | |
| – | Comparator buzzer | |
| – | Front panel key lock out prevents operator tampering | |
| – | Fully selectable decimal joint positioning | |
| – | Programmable gravity compensation | |
| – | Selectable units of measuring: None, g, kg, t, lbs (USA) | |
| Option: | ||
| – | OP-01 BCD output | |
| – | OP-02 Relay output | |
| – | OP-03 RS-422/RS-485 I/O | |
| – | OP-04 RS-232C I/O | |
| – | OP-05 Parallel I/O | |
| – | OP-07 Analog output | |
Static Weighing
AD-4405A
| Features: | |
| – | Bright green VFD 20mm (height) display |
| – | Optional Dot Matrix Compact Printer |
| – | 10 keys for preset tare and units weighing setting etc |
| – | Counting function |
| – | Universal Flexi Coms |
| UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C | |
| – | Multi interval |
| 2 weighing ranges selectable | |
| – | Accumulation Function |
| Accumulative data is stored into memory automatically or manually | |
| – | Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison |
| Comparator output to optional relays | |
| – | Simple batch weighing |
| Automatic batching and customer programming capability | |
| – | Standard RS-232C |
| – | Buzzer function |
| – | Code memory function |
| Option: | |
| – | AD-4405-03: RS-422/485 and Relay |
| – | AD-4405-05: RS-232C, Relay output and Control input |
| – | AD-4405-06: Built-in Printer |
| – | AD-4405-07: Analog Output (4-20mA) |
| – | AD-4405-08: RS-232C, Relay output, Current Loop and Control input |
AD-4406A
| Features: | |
| – | High cost-effectiveness |
| – | Big LCD 25mm in height |
| – | Multi power supply |
| – | Alkaline C type battery: |
| – | battery life 180 hours (LC 350ohms x 1) |
| – | battery life 70 hours (LC 350ohms x 4) |
| – | Optional AC adapter |
| – | F1, F2 selectable function keys |
| – | Load cell 350 ohms x 4 |
| – | Optional stand available |
| – | Universal Flexi Coms |
| UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C | |
| – | Multi interval |
| 2 weighing ranges selectable | |
| – | Accumulation Function |
| Accumulative data is stored into memory automatically or manually | |
| – | Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison |
| Comparator output to optional relays | |
| – | Simple batch weighing |
| Automatic batching and customer programming capability | |
| – | Buzzer function |
| – | Code memory function |
| Option: | |
| – | AD-4406-03: RS-422/485 and Relay |
| – | AD-4406-04: RS-232C |
| – | AD-4406-05: RS-232C Relay and Control input |
| – | AD-4406-07: Analog Output (4-20mA) |
| – | AD-4406-08: RS-232C , Current Loop Output, 3-Reley Output and 1-Control Input |
| – | AD-4406-11: Display Stand |
AD-4406A
| Features: | |
| – | Bright green VFD 20mm (height) display |
| – | Bracket standard |
| – | 10 keys for preset tare and units weighing setting etc |
| – | Counting function |
| – | Universal Flexi Coms |
| UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C | |
| – | Multi interval |
| 2 weighing ranges selectable | |
| – | Accumulation Function |
| Accumulative data is stored into memory automatically or manually | |
| – | Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison |
| Comparator output to optional relays | |
| – | Simple batch weighing |
| Automatic batching and customer programming capability | |
| – | Standard RS-232C |
| – | Buzzer function |
| – | Code memory function |
| Option: | |
| – | AD-4407-03: RS-422/485 and Relay |
| – | AD-4407-05: RS-232C Relay and Control input |
| – | AD-4407-07: Analog Output (4-20mA) |
| – | AD-4407-08: RS-232C , Current Loop Output, 3-Reley Output and 1-Control Input |
Vibration-Resistant Weighing Indicator
AD-4408A
| Features: | |
| – | Various types of field network (fieldbus) modules can be installed |
| – | High-performance digital filtering that eliminates the effects of strong vibration |
| – | High-speed (100 times/sec.), highly-accurate performance |
| – | Compact, lightweight body makes it ideal for mounting into a control panel |
| – | Dust and water-proof display (when mounted into a panel) |
| – | Highly tolerant against electromagnetic noise |
| Option: | |
| External input and output | |
| – | Profibus Plug-In Module |
| – | Modbus-RTU Plug-In Module |
| – | DeviceNet Plug-In Module |
AD-4408C
| Features: | |
| – | Direct connection to CC-Link with the CC-Link interface (provided as standard) |
| – | High-performance digital filtering that eliminates the effects of strong vibration |
| – | Simple design to facilitate connection to a PLC |
| – | High-speed (100 times/sec.), highly-accurate performance |
| – | Compact, lightweight body makes it ideal for mounting into a control panel |
| – | Dust and water-proof display (when mounted into a panel) |
| – | Up to 64 units can be connected with one master unit (when configured with the AD-4408C) |
| Option: | |
| – | |
AD-44010
| Features: | |
| – | Powerful vibration-cancelling function (High Performance Digital Filter) |
| – | High speed sampling (100 times/second)/high accuracy |
| – | Circuits equipped with powerful noise reduction |
| – | Accurate linear correction function using high-order equations |
| – | Average holding function |
| – | Comes equipped with Modbus-RTU |
| Option: | |
| – | OP-03 RS-485 DIN conncector |
| – | OP-04 RS-232 DIN conncector |
| – | OP-07 Analog output (4 – 20 mA) |
| – | OP-11 Stand |
AD-4430A
| Features: | |
| – | Powerful vibration-cancelling filter HPDF (High Performance Digital Filter) |
| – | Dual HPDF |
| – | Flow rate output |
| – | Control I/O (6 inputs, 8 outputs) as standard |
| – | USB interface to import/export function settings |
| – | Averaging hold, peak hold and comparator functions |
| – | DIN rail mounting type to install into control box |
| Option: | |
| – | |
AD-4430B
| Features: | |
| – | DIN rail mounted type ideal for insertion into control board |
| – | Powerful vibration-cancelling function (High Performance Digital Filter) |
| – | High speed sampling (1000 times per second) – High accuracy |
| – | BCD input/output a standard feature (up to 1000 times/sec high speed output) |
| – | Load cell connection failure diagnosis function |
| – | Equipped with powerful noise suppression circuit |
| – | Accurate linear correction function using high-order equations |
| – | Equipped with averaging hold, peak hold and comparator functions |
| Option: | |
| – | |
AD-4430C
| Features: | |
| – | Powerful vibration-cancelling filter (High Performance Digital Filter) |
| – | Sequential filling/dispensing measurement capability |
| – | Internal setpoint control |
| – | Active free fall compensation |
| – | I/O points (6 inputs, 8 outputs) as standard |
| – | Remote I/O connectivity for PLC input and output |
| – | USB interface to import/export function settings |
| – | Averaging hold, peak hold and comparator functions |
| – | DIN rail mounting type to install into control box |
| Option: | |
| – | |
AD-4430R
| Features: | |
| – | Powerful vibration-cancelling filter (High Performance Digital Filter) |
| – | Dual HPDF |
| – | Dual flow rate output |
| – | Sequential filling/dispensing measurement capability |
| – | Internal setpoint control |
| – | Active free fall compensation |
| – | I/O points (6 inputs, 8 outputs) as standard |
| – | Remote I/O connectivity for PLC input and output |
| – | USB interface to import/export function settings |
| – | Averaging hold, peak hold and comparator functions |
| – | DIN rail mounting type to install into control box |
| Option: | |
| – | |
Multi-purpose Digital Indicator
AD-4530
| Features: | |||||||||||||
| – | Low cost digital indicator for various applications. Suitable for measurement of load, pressure, torque, tension and more at an affordable price. | ||||||||||||
| – | Digital Zero (DZ) stores zero data at any measurement point. This function can also be used to tare weight. | ||||||||||||
| Measurement can simply be restarted when it was interrupted by a loss of power. | |||||||||||||
| – | Power on zero function adjusts to zero when the power is turned on. | ||||||||||||
| – | Digital filter provides stable measurement results. | ||||||||||||
| – | Digital span calibration. Easy calibration just by inputting the rated output of a sensor. No need to use a mass. | ||||||||||||
| – | Unit characters – Up to five alphanumeric characters can be added to serial output. | ||||||||||||
| – | Comparator function displays and outputs HI, OK and LO according to upper and lower limit settings. Hysterisis | ||||||||||||
| width and time can be set to prevent chattering on the output terminal. This reduces load on the relay circuit. | |||||||||||||
| – | Hold function. Selectable from sample hold, peak hold, bottom hold and bipolar peak hold. The peak hold | ||||||||||||
| function allows the user to capture the peak value and easily obtain the maximum value of a destruction test | |||||||||||||
| or tightening torque. | |||||||||||||
| – | Latch function holds display value/comparator (optional)/analog output (optional)/serial output (optional) | ||||||||||||
| corresponding to external latch input. | |||||||||||||
| – | Various data output (optional). Necessary data can be easily obtained using optional comparator relay output, | ||||||||||||
| serial output (RS-485/RS-232C), D/A voltage output and D/A current output | |||||||||||||
| Option: | |||||||||||||
| – | AD4530-200 – Relay output | ||||||||||||
| – | AD4530-030 – RS485 | ||||||||||||
| – | AD4530-040 – RS-232C input/output | ||||||||||||
| – | AD4530-007 – D/A analog output | ||||||||||||
| – | AD4530-237 – Relay output, RS485 and D/A analog output | ||||||||||||
| – | AD4530-247 – Relay output, RS232C and D/A analog output | ||||||||||||
| *The options above cannot be used at the same time. | |||||||||||||
AD-4531B
| Features: | |
| – | Suitable for load, pressure, torque or tension measurement plus more |
| – | Digital span calibration possible without using an actual load |
| – | Zero correction value can be backed up |
| – | Various output options available |
| – | Performs A/D conversion at 100 times per second |
| Option: | |
| – | AD4530-200 – Relay output |
| – | AD4530-030 – RS485 |
| – | AD4530-040 – RS-232C input/output |
| – | AD4530-007 – D/A analog output |
| – | AD4530-237 – Relay output, RS485 and D/A analog output |
| – | AD4530-247 – Relay output, RS232C and D/A analog output |
| *The options above cannot be used at the same time. | |
AD-4532B
| Features: | |
| – | New Tricolor (Orange, Green & Red) LED Display. Highly visible easy-to-read display |
| – | Enhanced comparator functions |
| In addition to a simple comparison of the upper/lower limit, the AD-4532B is equipped with a 2D comparator function that shifts | |
| between the upper/lower limit in five levels using a time control or an external signal. | |
| – | 2D (5-level) comparator function |
| This function makes it possible to determine the acceptability of the total result by performing a sequential | |
| comparison while shifting between the upper/lower limit in five levels using a time axis or an external input (trigger). | |
| It is ideal for use in measurements, such as a press-in operation, which require changes in the comparison | |
| value as time elapses.The five comparators can also be used individually. | |
| – | High-speed A/D*1 and D/A*2 conversion function at 2000 times/sec. |
| *1 Analog-to-digital conversion *2 Digital-to-analog conversion | |
| – | Calibration without an actual load |
| The digital span calibration function makes it possible to perform a calibration by entering the rated output (mV/V) of the sensor | |
| using the numeric keys. This function is useful when an actual load cannot be applied. | |
| – | Latching function |
| The display, the comparator output and the D/A voltage output can be latched (data output hold). | |
| Relay output with a long-life MOSFET relay | |
| – | Chatter-prevention function |
| If bouncing of the comparator value occurs repeatedly near the upper/lower limit, a heavy burden will be placed on the relay | |
| circuit and other parts. To prevent this, the AD-4532B has a function to set the hysteresis width and time. | |
| – | Hold Function |
| The hold mode can be activated using the front panel key,a Modbus-RTU, or the external input terminal on the rear panel. | |
| – | Wide variety of data input/output |
| The AD-4532B comes equipped with an analog amplifier voltage output (±10V), a D/A analog voltage output (±10V), | |
| a comparator output and a Modbus-RTU input/output. In addition, we offer an optional BCD output, RS-232C input/output, | |
| D/A analog voltage/current output (±10V / 4 to 20mA) and Ethernet. The upper/lower limit setting, the zero compensation | |
| function and the hold function can be executed via Modbus-RTU. | |
| Option: | |
| – | AD4532B-01* – BCD output (40-pin FCN connector) |
| – | AD4532B-04 – RS-232C (D-sub 9 pin) |
| – | AD4532B-07* – D/A analog voltage/current output (±10V and 4~20mA) |
| – | AD4532B-08 – Ethernet interface (RJ-45) |
| *Options 01 and 07 are provided with each connector. | |
| Note: Options 01, 04, 07 and 08 above cannot be used at the same time | |
Weighing Data Logger
AD-1688
| Features: | |
| The AD-1688 weighing data logger is a handheld device that lets you collect weighing data without connecting the balance or scale to a PC! | |
| – | Dual interface – RS-232C and USB connections |
| – | Large memory of approx. 5,000 weighing data sets |
| – | Internal clock to save the date and time |
| – | Pocket size of 55 × 103 × 16.5 mm |
| – | IP65 (with the casing cover) |
| – | No battery required |
Single Point Bending Beams
LCB03
| Features: | ||
| Compact design for bench scale, single point compact load cells | ||
| – | Ultra compact design –Just 13 cm in length | |
| – | Adjusted for 4 corner loads | |
| – | Moisture proof | |
| – | Wide model selection -8 models | |
| – | Aluminum construction | |
LCB04
| Features: | |
| Adjusted for 4 corners, useful for platform scale, single point compact load cells | |
| – | Ultra compact design -Just 15cm in length |
| – | Calibrated for 4 corner loads |
| – | Moisture proof |
| – | 4 models to choose from |
| – | Aluminum construction |
LCB05
| Features: | |
| Stainless Steel hermetical sealed structure ideal for application under harsh environment | |
| – | Stainless steel hermetical sealed structure |
| – | ideal for application under harsh environment |
| – | Maximum platform size is 400×400mm |
| – | Calibrated for 4 corner loads |
| – | Both tension and compression usage |
LCB22
| Capacity | Model No. | CAD File |
| 6kg (58.84N) | LCB22K006 |  Download |
| 10kg (98.07N) | LCB22K010 | |
| 15kg (147.1N) | LCB22K015 | |
| 20kg (196.1N) | LCB22K020 | |
| 30kg (294.2N) | LCB22K030 |
| Features: | |
| Single-point Aluminum Load Cell with Built-in Overload Stopper | |
| – | Calibrated for 4 corner loads |
| – | IP65, IP67 |
| – | Extremely durable structure built to withstand excessive loads and impacts |
| – | Aluminum construction |
LC-4001
| Capacity | Model No. |
| 120 gf | LC4001-G120 |
| Features: | |
| Ultra-high sensitivity for precision balances,single point compact load cells | |
| – | Parallelogram-type construction |
| – | Ultra-high sensitivity, resolution as high as 10 mg |
| – | Metal overload stopper built in |
| – | Deadweight up to 80 percent of capacity |
| – | Moisture proof |
| – | Compact and lightweight |
| – | Aluminum construction |
LC-4101
| Capacity | Model No. | CAD file |
| 600 gf | LC4101-G600 | Download |
| 1.5 kgf | LC4101-K1.5 | |
| 3 kgf | LC4101-K003 | |
| 6 kgf | LC4101-K006 | |
| 15 kgf | LC4101-K015 |
| Features: | |
| For small capacity weighing applications,single point compact load cells | |
| – | Parallelogram-type construction |
| – | Temperature compensation maintains both zero and span from -10 °C to +40 °C/+14 °F to +104 °F |
| – | Deadweight up to 80% of capacity. Load weight and deadweight up to 180% of capacity |
| – | Moisture proof |
| – | Compact and lightweight |
| – | Can be used for capacities as light as 600 g |
| – | Aluminum construction |
LC-4102
| Capacity | Model No. | CAD file |
| 10 kgf | LC4102-K010 | Download |
| 15 kgf | LC4102-K015 | |
| 30 kgf | LC4102-K030 | |
| 60 kgf | LC4102-K060 | |
| 150 kgf | LC4102-K150 |
| Features: | |
| For small and medium capacity weighing system,single point compact load cells | |
| – | Parallelogram-type construction |
| – | Temperature compensation maintains both zero and span from -10 °C to +40 °C (+14 °F to +104 °F) |
| – | Deadweight up to 80 % of capacity. Load weight and deadweight up to 180% of capacity |
| – | Moisture proof |
| – | Compact and lightweight |
| – | Aluminum construction |
LC-4103
| Capacity | Model No. | CAD file |
| 60 kgf | LC4103-K060 | Download |
| 100 kgf | LC4103-K100 | |
| 150 kgf | LC4103-K150 |
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
| Features: | |
| For use with medium size platforms, single point compact load cells | |
| – | Parallelogram-type construction |
| – | 400 × 600 mm platforms can be used |
| – | Temperature compensation maintains both zero and span from -10 °C to +40 °C (+14 °F to +104 °F) |
| – | Deadweight up to 80% of capacity. Load weight and deadweight up to 180% of capacity |
| – | Moisture proof |
| – | Compact and lightweight |
| – | Aluminum construction |
LC-4204
| Capacity | Model No. |
| 300 kgf | LC4204-K300 |
| 600 kgf | LC4204-K600 |
| Features: | ||
| Useful for both single point or multi-point applications, single point compact load cells | ||
| – | Parallelogram-type construction | |
| 700×600 mm platforms can be used (For single point applications) | |
| – | Can be used for both single point and multi point applications | |
| – | Moisture proof | |
| – | Temperature compensation maintains both zero and span from -10 °C to +40 °C (+14 °F to +104 °F) | |
| – | Aluminum construction | |
Single Ended Shear Beams
LCM13
| Features: | |
| Stainless steel body construction protection from water, moisture and corrosion | |
| – | Stainless steel body is ideal protection from corrosion (IP67) |
| – | Low profile and lightweight for easy mounting |
| – | Compact size. |
| – | For both tension and compression usage |
| – | Can be used for multi-point weighing |
LCM19
| Capacity | Model No. | |
| 509.9 Kg (5kN) | LCM19K500 | |
| 1.020t (10kN) | LCM19T001 | |
| 1.530t (15kN) | LCM19T1.5 | |
| 2.039t (20kN) | LCM19T002 |
| Features: | |
| Beam Load Cells for Tank and Floor Scales | |
| – | For both tension and compression usage |
| – | IP67 |
| – | Dustproof/waterproof |
LC-4221
| Capacity | Model No. |
| 10 kgf | LC4221-K010 |
| 20 kgf | LC4221-K020 |
| 50 kgf | LC4221-K050 |
| 100 kgf | LC4221-K100 |
| 200 kgf | LC4221-K200 |
| 300 kgf | LC4221-K300 |
| Features: | |
| Stainless steel body construction protection from water, moisture and corrosion | |
| – | Hermetically sealed with stainless steel bellows protects from water and moisture |
| – | Stainless steel body is ideal protection from corrosion |
| – | Compact size and lightweight |
| – | For both tension and compression usage |
| – | Dual guided cantilever design for high accuracy |
| – | Can be used for multi-point weighing |
| – | Temperature compensation maintains both zero and span from -10 °C to +60 °C (+14 °F to +140 °F) |
LC-5206
| Capacity | Model No. |
| 300 kgf | LC5206-K300 |
| 500 kgf | LC5206-K500 |
| 1 tf | LC5206-T001 |
| 2 tf | LC5206-T002 |
| Features: | |
| General purpose load cells ideally suited for platform and tank scale weighing | |
| – | Constant moment beam and shear beam construction |
| – | Designed to resist overload damage |
| – | Moisture protected |
| – | Tension and compression loading |
| – | Tool Steel construction |
LC-5223
| Capacity | Model No. |
| 500 kgf | LC5223-K500 |
| 1 tf | LC5223-T001 |
| 1.5 tf | LC5223-T1.5 |
| 2 tf | LC5223-T002 |
| 3 tf | LC5223-T003 |
| 5 tf | LC5223-T005 |
| Features: | |
| For low profile platform scales, hopper scales and more | |
| – | Low profile and lightweight for easy mounting |
| – | For both tension and compression usage |
| – | Moisture proof |
| – | Can be used for multi-point weighing |
| – | Tool Steel construction |
S-Type
LC-1205
| Capacity | Model No. |
| 20 kgf | LC1205-K020 |
| 50 kgf | LC1205-K050 |
| 100 kgf | LC1205-K100 |
| 200 kgf | LC1205-K200 |
| 500 kgf | LC1205-K500 |
| 1 tf | LC1205-T001A |
| 2 tf | LC1205-T002 |
| 5 tf | LC1205-T005 |
| Features: | |
| For general purpose tension, compression measuring | |
| – | Dual guided cantilever and shear beam design for high accuracy |
| – | Compact, lightweight and easy to handle |
| – | Temperature compensation maintains both zero and span from -10 °C to +60 °C (+14 °F to +104 °F) |
| – | Moisture proof |
| – | Can be used for multi-point weighing |
| – | Tool Steel construction |
LC-1216
| Capacity | Model No. |
| 100 kgf | LC1216-K100 |
| 200 kgf | LC1216-K200 |
| 500 kgf | LC1216-K500 |
| 1 tf | LC1216-T001A |
| 2 tf | LC1216-T002A |
| 5 tf | LC1216-T005 |
| Features: | |
| For general purpose tension, compression measuring , use in hostile environments | |
| – | Dual guided cantilever and shear beam design for high accuracy |
| – | Hermetically sealed for complete protection from water and moisture and for use in harsh environments |
| – | Temperature compensation maintains both zero and span from -10 °C to +60 °C (+14 °F to +140 °F) |
| – | Can be used for multi-point weighing |
| – | Tool Steel construction |
LCS15
| Capacity | Model No. |
| 500 kgf (5 kN) | LCS15K500 |
| 1 tf (10 kN) | LCS15T001 |
| 2 tf (20 kN) | LCS15T002 |
| Features: | |
| For general purpose tension, compression measuring | |
| – | Best suited for tank and hopper scales. The corrosive-resistant |
| – | Stainless steel is ideal to be used in harsh environments. |
| – | The structure is less susceptible to biased loading. |
| – | Compression measurements are also possible. |
Compression
LCC07
| Capacity | Model No. | CAD File |
| 500 kgf | LCC07K500 | Download |
| 1 tf | LCC07T001 | |
| 2 tf | LCC07T002 | |
| 3 tf | LCC07T003 | |
| 5 tf | LCC07T00 |
| Features: | |
| For tanks and hopper applications | |
| – | Stainless steel housing ideal for using in the food/chemical industry |
| – | Rocking absorption type |
| – | Designed for tanks and hoppers |
| – | Compression typed |
LCC11/N
| Capacity | Model No. |
| 10 tf | LCC11T010/LCC11T010N |
| 20 tf | LCC11T020/LCC11T020N |
| 30 tf | LCC11T030/LCC11T030N |
*LCC11 Series (with mounting kit)
*LCC11N Series (without mounting kit)
| Features: | |
| For truck scale and hopper scale | |
| – | Hermetical sealed stainless steel construction protection from water, moisture and corrosion(IP68)* |
| – | Advanced load design for tanks, hoppers and truck scales |
| – | Compression type |
| – | LCC11 Series (with mounting kit) |
| – | LCC11N Series (without mounting kit) |
LCC12
| Capacity | Model No. | CAD File |
| 100 kN (10 tf) | LCC12T010 | Download |
| 200 kN (20 tf) | LCC12T020 | |
| 300 kN (30 tf) | LCC12T030 |
*LCC12 Series Weigh Module
*load cell with mount assembly (all stainless steel)
| Features: | |
| For truck scale and hopper scale | |
| – | Hermetically sealed stainless steel construction protection from water, moisture and corrosion (IP68)*. |
| – | Advanced load design for tanks, hoppers. |
| – | Compression type |
| – | Mount assembly (anti-vibration, floating prevention mechanism) |
| – | LCC12 Series Weigh Module load cell with mount assembly (all stainless steel) |
LCC21
| Features: | |
| Stainless Steel Compact Compression Load Cell | |
| – | Suitable for load distribution and press pressure measurement |
| – | Rated capacities: 100N (10.20kg) to 1kN (102.0kg) |
| – | Standard attachment holder |
LCCA21
| Features: | |
| – | Stainless Steel Compact Compression Load Cell |
| – | Suitable for load distribution and press pressure measurement |
| – | Rated capacities: 100N (10.20kg) to 1kN (102.0kg) |
| – | Include standard attachment holder 1 piece and amplifier case holder 1 set |
Framefroof
LCM17
| Features: | |
| Flameproof enclosure stainless steel beam load cells for platform, tank or hopper scales | |
| – | Suitable for use in harsh environments where flammable hazardous substances are handled and corrosion resistance is required. |
| – | Suitable for platform or tank scales. |
| – | For both tension and compression applications. |
LCB01/02/06
| Features: | |
| Flameproof single point load cells ideal for hazardous environment applications | |
| – | Flameproof class ExdlBT4 conformed |
| – | Adjusted for four corners |
| – | Tension and compression loading |
| – | Maximum pan sizes are 400 × 400 mm (LCB01), 400 × 600 mm (LCB02) and 600 × 700 mm (LCB06) |
Hazardous & Special Application
CP/TP series
| Capacity | Model No. |
| 20.339kg (200N) | TP (CP)-20L |
| 50.99kg (500N) | TP (CP)-50L |
| 102.0kg (1kN) | TP (CP)-100L |
| 203.9kg (2kN) | TP (CP)-200L |
| 305.9kg (3kN) | TP (CP)-300L |
| 509.9kg (5kN) | TP (CP)-500L |
| 1.020t (1 OkN) | TP (CP)-1 |
| 2.039t (2 OkN) | TP (CP)-2 |
| 3.059t (3 OkN) | TP (CP)-3 |
| 5.099t (5 OkN) | TP (CP)-5 |
| 10.20t (1 OOkN) | TP (CP)-10 |
| 20.39t (2 OkN) | TP (CP)-20 |
| 30.59t (3 OkN) | TP (CP)-30 |
| 50.99t (5 OkN) | TP (CP)-50 |
| 102.0t (1 MN) | TP (CP)-100L |
| Features: | |
| CP Series (Tool Steel) TP Series (Tool Steel) | |
| Tension / Compression Load Cells | |
| For General applications, hazardous temperatures and high precision requirement | |
| Features | |
| – | Hermetically sealed for complete protection from water and moisture (IP67). |
| – | Ideal for harsh environments. |
| – | Atmospheric compensation for low range models(CP/TP-20L-CP/TP100L). |
| – | High reliability and satiability. |
| – | capacity 20kgf ~ 100tf |
C2Z1 series/C2X1 Series
| Capacity | Model No. |
| 509.9kg (5kN) | C2F1 (C2Z1)-500L |
| 1.020t (10kN) | C2F1 (C2Z1)-1 |
| 2.039t (20kN) | C2F1 (C2Z1)-2 |
| 5.099t (50kN) | C2F1 (C2Z1)-5 |
| 10.20t (100kN) | C2F1 (C2Z1)-10 |
| 20.39t (200kN) | C2F1 (C2Z1)-20 |
| 30.59t (300kN) | C2X1-30 |
| 50.99t (500kN) | C2X1-50 |
| 102.0t (1MN) | C2X1-100 |
| 203.9t (2MN) | C2X1-200 |
| 305.9t (3MN) | C2X1-300 |
| 509.9t (5MN) | C2X1-500 |
| Features: | |
| C2Z1 Series (Tool Steel) C2X1 Series (Tool Steel) | |
| Compression Load Cells | |
| Hermetically Sealed for Hazardous Area up to 500t Capacity | |
| Features | |
| – | Ultimate overload protection to 1000% of R.L. (C2Z1). |
| – | Hermetically sealed for complete protection from moisture and water (IP67). |
| – | High reliability and satiability. |
| – | Temperature compensation range -10°C ~ +75°C. |
| – | capacity C2Z1 500kgf ~ 20tf C2X1 30tf ~ 500tff |
LBP series
| Capacity | Model No. |
| LBP-10L | 10.20kg (100N) |
| LBP-20L | 20.39kg (200N) |
| LBP-30L | 30.59kg (300N) |
| LBP-50L | 50.99kg (500N) |
| LBP-100L | 102.0kg (1kN) |
| LBP-200L | 203.9kg (2kN) |
| LBP-300L | 305.9kg (3kN) |
| LBP-500L | 509.9kg (5kN) |
| LBP-1 | 1.020t (1 0kN) |
| LBP-2 | 2.039t (2 0kN) |
| LBP-5 | 5.099t (5 0kN) |
| LBP-10 | 10.20t (1 00kN) |
| Features: | |
| LBP Series (Tool Steel) | |
| Hermetically sealed Beam Load Cells | |
| Tension / Compression Load Cells | |
| Features | |
| – | Hermetically sealed for complete protection from moisture and water (IP67). |
| – | Compact size enable to set up low height floor scale. |
| – | Easy-to-mount:platform scale and hopper. |
| – | capacity 10kgf ~ 10tf |
CMX/CM Series
| Capacity | Model No. |
| CMX-50L | 50.99kg (500N) |
| CMX-100L | 102.0kg (1kN) |
| CMX-200L | 203.9kg (1kN) |
| CMX-500L | 509.9kg (5kN) |
| CMX-1 | 1.020t (1 0kN) |
| CMX-2 | 2.039kg (20kN) |
| CM-5 | 5.099t (5 0kN) |
| CM-10 | 10.20t (1 00kN) |
| CM-20 | 20.369t (2 00kN) |
| Features: | |
| CMX Series (Stainless steel) CM Series (Tool Steel) | |
| Compression Load Cells | |
| Miniature size and light weight construction for waterproof. | |
| Features | |
| – | Ultra low height for minimum space to mount. |
| – | Moisture, water and corrosion proof body (IP67).. |
| – | For both industrial usage and labs. |
| – | Easy-to-mount:tank, conveyer and hopper. |
| – | capacity CMX 50kgf ~ 2tf CM 5tf ~ 20tf |
