We are the pioneer the produced of screw-up type terminal blocks. The high quality and the wide range of terminal blocks are one of our bestseller.

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail

This is the standard terminal blocks with the free terminal screw which has 240A~1000A.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

IT series release you from troublesome work at branching from the receiving to the distribution side of a switchboard or distribution board.

There are 1~3 connecting screw on the line side. So you can use several electric wires depending on capacitance.
There are 3~7 connecting screw on the load side, which has a wide range of branching.

They have direct mounted and rail mounted.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

All the standard models come with a cover and nameplate.

IT series release you from troublesome work at branching from the receiving to the distribution side of a switchboard or distribution board.

There are 1~3 connecting screw on the line side. So you can use several electric wires depending on capacitance.
There are 3~7 connecting screw on the load side, which has a wide range of branching.

They have direct mounted and rail mounted.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

All the standard models come with a cover and nameplate.

TG series is the terminal block with high current, which has 400A~1200A.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

A solderless terminal can be connected on each of the top and bottom of the conductive plate.

All the standard models come with a cover and nameplate.
We also have special cover specialized safety.

Adopts finger protection structure for safety.
It prevents from finger accidental contract.

There are varieties of this series that you can choose from 11A to 75A.

Terminal screw dropping prevention design keeps machine equipment from short circuit accident by dropping screw. (Up-screw structure)

The solderless terminal is available for the ring and fork type.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Adopts finger protection structure for safety.
It prevents from finger accidental contract.

There are varieties of this series that you can choose from 11A to 75A.

Terminal screw dropping prevention design keeps machine equipment from short circuit accident by dropping screw. (Up-screw structure)

We use m-PPE which is excellent at withstand voltage and insulation resistance.

The solderless terminal is available for the ring and fork type.

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Adopts finger protection structure for safety.
It prevents from finger accidental contract.

You can recognize connection at first sight.

Terminal screw dropping prevention design keeps machine equipment from short circuit accident by dropping screw. (Up-screw structure)

The solderless terminal is available for the ring and fork type.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Adopts finger protection structure for safety.
It prevents from finger accidental contract.
.
Terminal screw dropping prevention design keeps machine equipment from short circuit accident by dropping screw. (Up-screw structure)

The solderless terminal is available for the ring and forlk type.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Adopts finger protection structure for safety.
It prevents from finger accidental contract.
.
This series doesn’t need cover because IP2X.

It is easy to put and remove nameplate compared with FP series.

Terminal screw dropping prevention design keeps machine equipment from short circuit accident by dropping screw. (Up-screw structure)

The solderless terminal is available for the ring and fork type.

End plate for FPWS-10 and -20 are same.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

The terminal blocks realize perfect safety and high performance thanks to TOGI’s unique movable mechanism and sliding contacts that have been employed through many tests.

Screw at the clamp side is anti-drop mechanism.

Both of DIN-rail mounting and directly mounting is available and enable to assemble by needed pitch number.

Three sizes of steel bus bars can be used.

Some terminal blocks are available with voltage terminals (See also NTB series catalog).

Disconnect terminal blocks series is suitable for wiring of control board and switchboard, checking meter, relay, and maintenance.

The terminal block can be operated by a single action with ON/OFF indication appearing on the side of the knob.
As for DTN-30 is ultra safe because of integral structure with knob and protect cover.

Mounting rail: DIN 35mm rail

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

NW series knob terminal blocks with a newly developed structure release you from troublesome work at leading in power.

You can lead power safely and speedily to power boards for factories or construction work, including welders, pumps, testing, and inspection machines.

We use PC (Polycarbonate) with high resistance to electrical, heat and mechanical.

Screws and knobs prevented from falling off (Except for 20 type screw). Hand tightening type requiring no tool.

Stud type is suited for terminal of wire or copper bus bar, branch and the stand.

They are manufactured in due consideration of design and cost.

We use PBT with high resistance to oils, heat and chemicals.

You can use F type for supporting and B type for as a conductor.
F type (Materials: steel, galvanized chromate-treated)
B type (Materials: brass, Nickel-plated)

(It is easy to mount terminal block from above to the rail.)

IT series release you from troublesome work at branching from the receiving to the distribution side of a switchboard or distribution board.

There are 1~3 connecting screw on the line side. So you can use several electric wires depending on capacitance.
There are 3~7 connecting screw on the load side, which has a wide range of branching.

They have direct mounted and rail mounted.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

All the standard models come with a cover and nameplate.

IT series release you from troublesome work at branching from the receiving to the distribution side of a switchboard or distribution board.

There are 1~3 connecting screw on the line side. So you can use several electric wires depending on capacitance.
There are 3~7 connecting screw on the load side, which has a wide range of branching.

They have direct mounted and rail mounted.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

All the standard models come with a cover and nameplate.

PTX-100
The line side : 175A MB/60m㎡
The load side : Total maximum current 175A (M6/22m㎡, M5X2/8m㎡)

PTX-225
The line side : 240A M10/100m㎡
The load side : Total maximum current 240A (M8/33m㎡, M5X2/8m㎡)

PTX-100
The line side : 175A MB/60m㎡
The load side : Total maximum current 175A (M6/22m㎡, M5X2/8m㎡)

PTX-225
The line side : 240A M10/100m㎡
The load side : Total maximum current 240A (M8/33m㎡, M5X2/8m㎡)

Rated insulation voltage: 1000V
As for rated current 240A, 400A and 600A, there are each stud type on the line side.

There are 1~3 connecting screw on the line side. So you can use several electric wires depending on capacitance.

There are 4(TKB-240)~7(TKB-400/TKB-600) connecting screw on the load side, which has a wide range of branching.

Rated insulation voltage: 1000V
As for rated current 240A, 400A and 600A, there are each stud type on the line side.

There are 1~3 connecting screw on the line side. So you can use several electric wires depending on capacitance.

There are 4(TKB-240)~7(TKB-400/TKB-600) connecting screw on the load side, which has a wide range of branching.

Breaker terminal blocks BRT series is a terminal blocks which can connect between breakers without the electric wire.
It is possible to connect with the cooper bar; you are liberated from the electric wire processing like the conventional.

As the pole pitch is wide, it can connect JIS standard solderless terminal that cannot connect to terminal part of breaker with conventional product.

We use m-PPE which excellent at withstand voltage and insulation resistance.

We have not only standard protect cover for BRT series but also special cover specialized safety after installation.

We are the pioneer the produced of screw-up type terminal blocks. The high quality and the wide range of terminal blocks are one of our bestseller.

AT-10~AT-150 features the prevention of the screw loosening and an improved resistance to tensile force.

Mounting rail : AS and DAS series.

PTU series is standard terminal block, which has a dominant share of this Japanese market.

This series are screw up type.

All types have been certified by UL, CSA, and TUV.

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

We are the pioneer the produced of screw-up type terminal blocks. The high quality and the wide range of terminal blocks are one of our bestseller.

AT-10~AT-150 features the prevention of the screw loosening and an improved resistance to tensile force.

Mounting rail : AS and DAS series.

PTU series is standard terminal block, which has a dominant share of this Japanese market.

This series are screw up type.

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

PUW series is screw up type. This product can be saved space and connected efficiency.

Wiring can be started from the upper or the under stage, whichever required, since the positions of terminals are different by half a pitch between the upper and the under stage.

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Mounting rail : DAV, DAS Series and DIN Rail / TS35 type

We are the pioneer the produced of screw-up type terminal blocks. The high quality and the wide range of terminal blocks are one of our bestseller.

AT-10~AT-150 features the prevention of the screw loosening and an improved resistance to tensile force.

Mounting rail : AS and DAS series

BT series terminal block have been widely used over the longest term of years. The terminal blocks are reputed for their tough body and easy handling.

The screw up type features the prevention of the screw loosening and an improved resistance to tensile force.

These terminal blocks designed for direct mounting only are finger safely type.

The assembly shaft is provided with covering to assure insulation.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

We are the pioneer the produced of screw-up type terminal blocks. The high quality and the wide range of terminal blocks are one of our bestseller.

AT-10 has been certified by TUV for export manufactures.

AT-10~AT-150 features the prevention of the screw loosening and an improved resistance to tensile force.
.
The rails can all be used with any of the terminal blocks for use with DAS type DIN 35mm or our 20mm rails.

All the terminal blocks in ATJ series are used with spring Up screw type. It brings easy connection.

This series are used with long connection screws, so that each terminal block can connect solderless terminals securely.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

The rails can all be used with any of the terminal blocks for use with DAS type DIN 35mm or our 20mm rails

※ See the operating instructions.
Information → New models → ATX series

It’s possible to attach and detach electric wire all together.

If ATX series is used when replacing, the stop time of the production line can be shortened.

If you use locked by lever type, you can detach the product easily even in narrow space.

You can lock terminal blocks easily by using slide lock structure.

It is possible to save the space between each unit by using locked by lever type.

JT series is the products, which inserted short bar into terminal block from above. It is easy to check the same pole (common).

It is possible to connect two wires with 1 screw, so this type can be save the space.

When electric testing, all you need is remove short bar. So you can check easily.

PTU series may be already familiar to you not only assures your speedy connection but also features the prevention of the screw loosening and an improved resistance to tensile force.
This type is one of most popular for workable.

All types have been certified by UL for export manufactures.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Applicable rail is DIN 35mm rail.

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

Ultra-up Mechanism Up screw type. This series are saved space and improved connection efficiency.

This series can be saved space in half. This is the most suitable terminal blocks for control panel, and instrumentation board, especially sequencer mounting panels.

You can connect wires for both of the upper and under terminal block. If you connect for the under terminal block later, you can wiring smoothly.
This features the prevention of the screw loosening and improved resistance to tensile force.

PUW series have been certified by UL for export manufactures.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Applicable rail is DIN 35mm rail.

You can mount this terminal block from above to the rail easily.
(It is easy to mount terminal block from above to the rail.)

CT series have the easy-to-use washer for Y type solderless terminal.

Mounting rail: AS, DAS Series and DIN Rail / TS35 type

CT series are available from 10A to 1000A. There are 14 kinds of products.

Even if the electric capacity is different, you can mount these terminal blocks on a rail as a one unit. It is used extensively.

All types have been certified by UL for export manufactures except for CT-15R, CT-800, and CT-1000.

Mounting rail: AS, DAS Series and DIN Rail / TS35 type.

Stud type for CT series is used with long connection screws.

Tightening torque: applicable standard JIS C 2805.

This series are available from 130A to 800A.

CTW series terminal block of a compact design can halve the required terminal block space inside your panels.

Wiring can be started from the upper or the under stage, whichever required, since the positions of terminals are different by half the pitch between the upper and the under stage.

CTW-15S2 has been certified by TUV for export manufactures.

There is CTW-15S2 on both sides. CTW-15R terminal blocks are designed for lapping connection on one side.

Mounting rail: DAV, DAS Series and DIN Rail / TS35 type.

PT series are available from 15A to 600A. There are 10 kinds of products.

Even if the electric capacity is different, you can mount these terminal blocks on a rail as a one unit. It is used extensively.

All types have been certified by UL and TUV for export manufactures.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail: DAV, DAS Series and DIN Rail / TS35 type.

You can mount this terminal block from above to the rail easily. (Except for PT-200~PT-600.)
(It is easy to mount terminal block from above to the rail.)

The support screw is held on the conductive plate even after it is loosened. Therefore you just have to tighten up the screw when connecting Y-type solderless terminal.

This type consisting of a smaller number of parts comes at a lower cost and will improve your operation efficiency considerably.

All types have been certified by TUV for export manufactures.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail: DAV, DAS Series and DIN Rail / TS35 type
You can mount terminal block from above to the rail easily. (It is possible to mount 1P~10P at once.)
The terminal blocks can be easily removed even in the middle of the rail. (Toolless) It creates speedy maintenance.

The support screw is held on the conductive plate even after it is loosened. Therefore you just have to tighten up the screw when connecting Y-type solderless terminal.

This type consisting of a smaller number of parts comes at a lower cost and will improve your operation efficiency considerably.

All types have been certified by TUV for export manufactures.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail: DAV, DAS Series and DIN Rail / TS35 type
You can mount terminal block from above to the rail easily. (It is possible to mount 1P~10P at once.)
The terminal blocks can be easily removed even in the middle of the rail. (Toolless) It creates speedy maintenance.

RT series terminal block is the standard terminal block with free terminal screws, ultra slim COMMON terminal blocks.

All this series can be mounted on the rail by a single action. In spite of small type, the terminal block with free terminal screws employ and easy-to-see nameplate of 10-mm width.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail: IAS, DIS Series, and DIN Rail / TS35 type

RTW series is the standard terminal block with free terminal screws, COMMON terminal blocks and 2-stage terminal blocks. 2-stage terminal blocks include HEAD COMMON terminal blocks, whose upper stage is designed for COMMON.

All this series can be mounted on the rail by a single action. In spite of small type, the terminal block with free terminal screws employ and easy-to-see nameplate of 10-mm width.

The 2-stage terminal block is small and allows multi-pole wiring in a small space.
For the power supply for a 3-wire sensor, the polarity of the terminals at the upper stage can be set to positive and negative alternately.

We use m-PPE which is excellent at withstand voltage and insulation resistance.

Mounting rail: IAS, DIS Series, and DIN Rail / TS35 type

The wiring method adopts spring type that does not loose by vibration.
There is no solderless terminal requirement. This type comes at lower cost and speedy connection.

Terminal spacing pitch is 5mm. Get 30% space minimizes comparing to screw up terminal blocks.

And there is no need the maintenance like screw up terminal block.

Mounting rail: DAV, DAS Series and DIN Rail /TS35 type
You can mount and remove terminal blocks by single action.

We use insulation material with high resistance to heat and chemicals. (UL94V-0)

Spring-cage type wire connection that no loose by vibration and highly performance and reliability is adopted.

We use insulation material with high resistance to heat and chemicals.

Mounting rail: DAV, DAS Series and DIN Rail /TS35 type

Spring-cage type wire connection that no loose by vibration and highly performance and reliability is adopted.

Use the ferrules type, wiring is easy to insert to terminal block.

Stranded cable is also can be wired with opening-closing button.

Continuity checking hole to check easily after wiring is completed on the upper side of terminal blocks.

This terminal block with free terminal screws employ and easy-to-see nameplate of 12-mm width

And there is no need the maintenance like screw up terminal block.

We use insulation material with high resistance to heat and chemicals.

Spring-cage type wire connection that no loose by vibration and highly performance and reliability is adopted.

And there is no need the maintenance like screw up terminal block.

Terminal block’s color has gray, standard color and also red, blue, and orange.

Use the ferrules type, wiring is easy to insert to terminal block.

We use insulation material with high resistance to heat and chemicals.

VTH-2.5 series is small space, height is 34.5mm (includes rail) and terminal pitch is 5.2mm.

Mounting rail: DAV, DAS Series and DIN Rail /TS35 type

Spring-cage type wire connection that no loose by vibration and highly performance and reliability is adopted.

And there is no need the maintenance like screw up terminal block.

Use the ferrules type, wiring is easy to insert to terminal block.

This series is small space, height is 54.5mm (includes rail) and terminal pitch is 5.2mm.

Mounting rail: DAV, DAS Series and DIN Rail /TS35 type

When the wiring is fixed successfully, the indication will stick out.

The design of the indication is “T” of “TOGI”, and it is easy to confirm it from all angles.

The indication is orange, visible color.

Reliability is adopted.

Mounting rail: DAV, DAS Series and DIN Rail /TS35 type

We use insulation material with high resistance to heat and chemicals.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

The Up screw type features the prevention of the screw loosening and an improved resistance to tensile force.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

The Up-screw type features the prevention of the screw loosening and an improved resistance to tensile force.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

BT series terminal block have been widely used over the longest term of years. The terminal blocks are reputed for their tough body and easy handling.

The Up screw type features the prevention of the screw loosening and an improved resistance to tensile force.

These terminal blocks designed for direct mounting only are finger safely type.

The assembly shaft is provided with covering to assure insulation.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

There are wide ranges of terminal blocks for example standard terminal blocks with the free terminal spring, rapped type and so on.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

There are wide ranges of terminal blocks for example standard terminal blocks with the free terminal screw, rapped type and so on.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

This is the standard terminal blocks with the free terminal screw which has 15A~1000A.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

This is the standard terminal blocks with the free terminal screw.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

The direct mounting terminal block is constituted just by adding side plates and shaft to the intermediate unit of the terminal block for use with a rail.

This is the standard ultra compact terminal blocks with the free terminal screw.

All the standard models come with a cover and nameplate, which is cut according to the number of poles.

Downsized width L by 4mm than ever before.
20poles (Type: PCN7-1H20) 80mm→75mm
34poles (Type: PCN7-1h34) 128mm→124mm
40poles (Type: PCN7-1H40) 149mm→145mm
50poles (Type: PCN7-1H50) 184mm→180mm

It is easy to wiring because of the different color with each key point.
You can use + driver when removing nameplate from cover.

When nameplate is opened at 140°with simple-lock system.

It is easy to find the wiring point because there is name sticker with nameplate on the center of terminal block.

There are marker on the upper stage with each key point.

You have to only tighten up the screw when connecting ring and fork type.

The product features the prevention of the screw loosening and an improved resistance to tensile force.

It is possible to connect 2 solderless terminals with terminal block.

You can wiring to the alternative upper or lower stage by solderless terminal that you use.

Downsized width L by 4mm than ever before.
20poles (Type: PCN7-1H20) 80mm→75mm
34poles (Type: PCN7-1H34) 128mm→124mm
40poles (Type: PCN7-1H40) 149mm→145mm
50poles (Type: PCN7-1H50) 184mm→180mm

It is easy to wiring because of the different color with each key point.
You can use + driver when removing nameplate from cover.

When nameplate is opened at 140°with simple-lock system.

It is easy to find the wiring point because there is name sticker with nameplate on the center of terminal block.

There are marker on the upper stage with each key point.

You have to only tighten up the screw when connecting ring and fork type.

The product features the prevention of the screw loosening and an improved resistance to tensile force.

It is possible to connect 2 solderless terminals with terminal block.

You can wiring to the alternative upper or lower stage by solderless terminal.

PCI series is more compact to associate with the sequencer of MITSUBISHI or OMRON’s PLC.

You can use for both in/out put by use different attached short bar.

Mounting rail: DIN Rail / TS35mm

Compact body (width): 40mm

For not only mounting rail type and but also direct mounting type.

Mounting rail: DIN Rail / TS35mm
Compact body (width): 40mm
Terminal block associated with connector on board to prevent wrong wiring.

Terminal number and connector number are one to one connections. It’s possible to design any circuit combination.
Efficiency of your work improved by use of new connection type. If you use fork-shaped terminal, we highly recommend PCN series.
Lever type. You don’t need any tools and space for removal.

We have rail mounted and direct mounted type.

PCN series: 7mm pitch

It is downsizing PLC and SBC interface.

This compact size brought to downsizing control board.

Connector terminal and terminal blocks are one to one connections.

We use support screw that is easy to wiring.
The product features the prevention of the screw loosening and an improved resistance to tensile force.

Terminal cover with nameplate, which is, printed terminal number. It brought us to efficiency when wiring.

We have rail mounted and direct mounted type.

This interface series is suitable for PLC.

It is easy to wiring because the signal array starting from the left to right.

Implementing connector are HIROSE Electric’s MIL CONNECTOR, and FUJITSU COMPONENT ‘s FCN360 connector.

There is cable which suitable for each connector terminals.

It is unnecessary to crimp. Labor saving European standards terminal blocks that can be connects bare wires.

By 5mm pitch terminal structure is designed for space saving.

Adopts finger protection structure for safely.

Connector terminal and terminal blocks are one to one connections.

This series are flexible about interface connection with any models.

There are 16 kinds of connectors includes MIL type connector by various manufactures. We can supply the products from 20 to 50poles for a wide range of your needs.

The product brought to simple appearance and price reduction by minimum insulation material using.

We have rail mounted and direct mounted type.

You need to just only attach from above and detach with the driver.

This interface is possible to use for power circuit or mortar circuit because rated current is large like 5A, and 3A.

There is 24 poles’ connector (12poles x 2). So it is easy to pass the wires with connector.

Withstand voltage is 1500V, and 1250V.

It is easy to remove the wires from control panel because of connection.

Terminal cover with nameplate, which is, printed terminal number. It prevent to wrong wiring.

We can print anything on our name print.

Connector is possible to remove wires from control panel very well by cutting the size of attachment hole and connector.

Mounting terminal blocks type can be saved space.

It is possible to attach with frame and flat surface by using our mounting plate.

Spring-lock type keeps a high connection also under the situation by which the vibration is received.
Unlike screw type, stable contact power keeps for long time by spring pressure, there is no need to maintenance like re-screwing.

When the terminal ferrule is used, speedy connection by only pushing the wire.

By 5mm pitch and 2 steps terminal structure that is designed for space saving, about 30% space reduces than existing the screw type.

Board wiring from implemental connector to terminal blocks (1 : 1)

We have rail mounted and direct mounted type.

This interface series is suitable for PLC.

It is easy to wiring because the signal array starting from the left to right.

Implementing connector are HIROSE Electric’s MIL CONNECTOR, and FUJITSU COMPONENT ‘s FCN360 connector.

There is cable which suitable for each connector terminals.

A terminal block mounted on the PCX series is 3.5mm pitch.

It is possible to check by insert φ2 test pin to checking hole.

Open-closing button of connecting spring is possible to use + and – driver.

You don’t need stopper by our rail-lock.

-53% space reduces than existing type. ※1

-57% space reduces than products with stopper.　※1

※ 1　Compared with PCN-1H40 and PCX-1H40.

A terminal block mounted on the PCX series is 3.5mm pitch.

It is possible to check by insert φ2 test pin to checking hole.

Open-closing button of connecting spring is possible to use + and – driver.

This series don’t need stopper by our rail-lock.

-53% space reduces than existing type. ※1

-57% space reduces than products with stopper.　※1

※1　Compared with PCN-1H40 and PCX-1H40.

Each terminal pitch is 3.5mm with new spring-lock terminal.
It is possible to check by insert Ф2 test pin to checking hole.
Open-closing button of connecting spring is possible to use + and – driver.
You don’t need stopper by our rail-lock.
-74% space reduces than products with stopper.

※1 Compared with PCN7-1H40 and PCXV-1H40

Each terminal pitch is 3.5mm with new spring-lock terminals.
It is possible to check by insert Ф2 test pin to checking hole.
Open-closing button of connecting spring is possible to use + and – driver.
You don’t need stopper by our rail-lock.
-74% space reduces than products with stopper.

※Compared with PCN7-1H40 and PCXV-1H40

From connector to connector——New interface, I/O Branch unit.
It brought high efficiency of the work and increase in density by connecting sensor and solenoid valve to connector. It can be speedy connection saving space compare with the terminal blocks.

Board circuit is designed for core instrument of MITSUBISHI, OMRON’s sequence (For 20,24 pin connector type, and DC24V).
It is possible to use different short bars for I/O.

It is easy to maintenance by connector. You can check the circuit with LED on the top.

Electric power supply for sensor branches COM (+) (-) of the each post housing in the unit.
It can be prevent wrong wiring. (It is needed external power supply for the power terminal.)
For mounting rail type and direct mounting type.

This ultra compact series is implemented e-con applicable standard connector.

Board circuit is designed for core instrument of MITSUBISHI, OMRON’s sequence (For 20,24 pin connector type, and DC24V).
It is possible to use different short bars for I/O.

You don’t need any special tool and pretreatment for wring.

It is possible to mount with DIN rail. (Also available custom built as a direct mounting.)

This ultra compact series is implemented e-con applicable standard connector.

Board circuit is designed for core instrument of MITSUBISHI, OMRON’s sequence (For 20,24 pin connector type, and DC24V).
It is possible to use different short bars for I/O.

You don’t need any special tool and pretreatment for wring.

It is possible to mount with DIN rail. (Also available custom built as a direct mounting.)

Downsized width L by 4mm than ever before.
20poles (Type: PCN7-1H20) 80mm→75mm
34poles (Type: PCN7-1H34) 128mm→124mm

It is easy to wiring because of the different color with each key point.
You can use + driver when removing nameplate from cover.

When nameplate is opened at 140°with simple-lock system.

It is easy to find the wiring point because there is name sticker with nameplate on the center of terminal block.

There are marker on the upper stage with each key point.

You have to only tighten up the screw when connecting ring and fork type.

The product features the prevention of the screw loosening and an improved resistance to tensile force.

It is possible to connect 2 solderless terminals with terminal block.

You can wiring to the alternative upper or lower stage by solderless terminal.

Mounting rail: DIN Rail / TS35mm

Compact body (width): 40mm

Terminal block associated with connector on board to prevent wrong wiring.

Terminal number and connector number are one to one connections. It’s possible to design any circuit combination.

Efficiency of your work improved by use of new connection type. If you use fork-shaped terminal, we highly recommend PCN series.

Lever type. You don’t need any tools and space for removal.

We have rail mounted and direct mounted type.

PCN series: 7mm pitch

It is downsizing PLC and SBC interface.

This compact size brought to downsizing control board.

Connector terminal and terminal blocks are one to one connections.

We use support screw that is easy to wiring.
The product features the prevention of the screw loosening and an improved resistance to tensile force.

Terminal cover with nameplate, which is, printed terminal number. It brought us to efficiency when wiring.

We have rail mounted and direct mounted.

16 points output relay terminal is enable select power relay and SSR (Solid State Relay).

4 points relay terminal is space saving slim type.
It can be prevent to wrong wiring.

For 16 points independent common terminals.

With power display, action indication, and LED (Red).

Also with surge absorber diode.

For DIN rail, and direct mounting type.

The terminal block and partitions are detachable, so that the terminal box can be wired outside and then installed inside the box.

The box and terminal block are made of PBT resin displaying excellent environmental performance.

The up- screw type terminal block assures easy connection.

The box can be installed on and removed from the DIN rail.

The models of this series features terminal block. Because of the small size and lightweight, it is optional as a junction for sensor or solenoid wiring.

The protective class IP-65 (IEC) structure enables direct installation on machines and conveyor lines. Also, the terminal blocks can be stacked two- or three- fold.

Compared with conventional junction boxes, these models realize labor saving and space saving in installation and wiring.

The cable diameter can be 3.5mm to 9.0mm.

It is useful because of opening and closing with 3 ways.

The lid is opened for both left and right side.
It has ease of working and maintenance after installation.

It is easy to detach the hinge type lid.

It is possible to mount on aluminum frame and narrow mounting surface by the use of the optional fixture: NTB-KC (2fixtures /1set).

You can Frame Ground connect from BOX inside.

The BOXTM series come in the form of compact resin terminal boxes designed for easy installation on industrial equipment.

You are sure to find a number of advantages of the combining box and terminal unit.

For instance, the time wasted in selecting an applicable terminal model or installing a terminal unit after delivery is now a thing of the past.

Also, the lightweight and compactness allows installation near moving parts or in limited space.

The resin material used with the BOXTM series proves quite competent.

For its high quality and easy installation, this series is best suited for applications on industrial machinery, such as machine tools and dedicated machines, as well as in harsh service environment.

The body is used PBT, which is excellent at oil and chemical resistance.

The box can be installed on and removed from the DIN rail.

Water resistance type, so that you can use in a hostile environment.

There are many kinds of hole, holeless, and lid in various ways.

It is useful because of opening and closing with 3 ways.

The lid is opened for both left and right side.
It has ease of working and maintenance after installation.

It is easy to detach the hinge type lid.

It is possible to mount on aluminum frame and narrow mounting surface by the use of the optional fixture: NTB-KC (2fixtures /1set).

You can Frame Ground connect from BOX inside.

The BOXTM series comes in the form of compact resin terminal boxes designed for easy installation on industrial equipment.

You are sure to find a number of advantages of combining box and terminal unit.

For instance, the time wasted in selecting an applicable terminal model or installing a terminal unit after delivery is now a thing of the past.

Also, the lightweight and compactness allows installation near moving parts or in limited space.

The resin material used with the BOXTM series proves quite competent.

For its high quality and easy installation, this series is best suited for applications on industrial machinery, such as machine tools and dedicated machines, as well as in harsh service environment.

The body is used PBT, which is excellent at oil and chemical resistance.

The box can be installed on and removed from the DIN rail.

Water resistance type, so that you can use in a hostile environment.

There are many kinds of hole, holeless, and lid in various ways.

CC-Link (Control & Communication Link) assists for controlling and data processing at the same time from diverse user needs at FA system and realizes high-speed field network system.

For Sink & Source (Photocoupler insulation)

Compatible with input device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

CC-Link (Control & Communication Link) assists for controlling and data processing at the same time from diverse user needs at FA system and realizes high-speed field network system.

For Sink & Source (Photocoupler insulation)

Compatible with input device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

CC-Link (Control & Communication Link) assists for controlling and data processing at the same time from diverse user needs at FA system and realizes high-speed field network system.

For Sink & Source (Photocoupler insulation)

Compatible with input device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

CC-Link (Control & Communication Link) assists for controlling and data processing at the same time from diverse user needs at FA system and realizes high-speed field network system.

For Sink & Source (Photocoupler insulation)

Compatible with input device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

CC-Link (Control & Communication Link) assists for controlling and data processing at the same time from diverse user needs at FA system and realizes high-speed field network system.

For Sink & Source (Photocoupler insulation)

Compatible with input device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

CC-Link (Control & Communication Link) assists for controlling and data processing at the same time from diverse user needs at FA system and realizes high-speed field network system.

For Sink & Source (Photocoupler insulation)

Compatible with input device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

It is available in world wide because standardized internationally. It is allow high-speed transfer by latest communication technology and wealth of messages.
It is accessible for a wide range of application by the flexibility of branching. We can offer a lot of control device by completely opening and several vendors.

Sink type (Photocoupler insulation)

Compatible with input/output device with DC24V

Three wire insulation displacement connector for input interface (PRS type)

Mounting rail: DIN Rail

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Electrostatic shield is included as standard.

It increased intensity by robust structure of terminal block.

Safety-conscious by elevates sidewall among terminal blocks.

We introduce C type cover, which is vibration-insensitive.

The material of terminal block is oil resistance, heat resistance and chemical resistance (UL94V-O).

It resolved sliding tools by approach terminal blocks to core.
(Unless some models. For details, please contact us.)

Cases for TRH, TRP and TRA

Caution!
Adapted capacity range is indication when use TR series transformer normally.
Please contact us in advance because it varies depending on the intended use.
You need hole making if our hole size is different.

Duct cutter is the best-suited tool for cutting hard and soft plastics.

It is easy to cut each plastic material such as wiring ducts and terminal cover by a combination of scoop of bed knife, slide cover and square attachment.

It is quick release by snap button.

There are 8 size (15Ф～100Ф), so it can be coated promptly for wiring.

It is easy to shift and check wiring because of quick release.

It can be fit into any kind of shape because of flexible material.

It is available to branched wiring because you can detach, as you like.

You can use black or gray of reversible type for your purpose.

Reversible type is not waste of stocks because they have both black and gray color.

It is possible to check inside of wiring because of clear color.

It is quick release without any tools.

It is easy to shift and check wiring because of quick release.

It can be fit into any kind of shape because of flexible material.

There are wide ranges of size so it can be coated promptly for wiring.

●GBR-1
It is available from 50mm to 350mm banding band.
Please pass band to tip then pull the trigger repeatedly.
You can cut the band when you half rotate it and pull the trigger strongly.
It doesn’t makes you tired by use resin.

●F303
It is cut automatically when you tighten to the intensity set in advance.
It is possible to tighten equally.
This is the tool which is banding electric wire. It is graduated 8 stages based on length of wiring and tie. Please refer to the folloing chart.